Important compatibility info
Function | Adjuster, braking system |
Placement on Vehicle | Rear Axle |
Operating Mode | Manual |
Weight | 2.325 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.68 kg |
Additional Information | with nuts |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1018 mm |
Additional Information 2 | with crown nut |
Paired article numbers | 12940 |
Weight | 2.15 kg |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M18 x 1,5, M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Weight | 3.950 kg |
Shock Absorber Mounting Type | Top pin, Bottom Clamp |
Mounting bores distance | 58 mm |
Max. Length | 530 mm |
Min. Length | 353 mm |
Pipe Diameter | 48.5 mm |
Piston conrod diameter | 22 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Current Strength | 29 A |
Weight | 0.160 kg |
Function | Control Unit, air conditioning |
Extra Description | febi Plus |
Type | Control Unit, air conditioning |
Replaces | 31966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.3 kg |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 573 mm. 580 mm |
Width | 27.2 mm. 28.6 mm |
Thickness | 1.8 mm |
Number of mounting bores | 11. 12 |
Function | Gasket Set, oil sump |
Type | Gasket Set, oil sump |
Weight | 0.124 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.41 kg |
Placement on Vehicle | Left Front |
Paired article numbers | 08876 |
Function | Door Seal |
Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.59 kg |
Material | Metal |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 42 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 50 mm |
Length | 109 mm |
Function | Repair Kit, kingpin |
Weight | 1.722 kg |
Placement on Vehicle | Upper Front Axle, both sides |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Weight | 0.280 kg |
Type | Dust Cover Kit, shock absorber |
Length | 197 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (175930)
- 2x Febi Rubber Buffer, suspension (175933)
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
External Thread Size | M24 x 1,5 |
External Teeth, Wheel Side | 29 |
Type | Joint Kit, drive shaft |
Weight | 3.180 kg |
Seal Diameter | 56 mm |
Internal Teeth, wheel side | 36 |
Length | 174 mm |
Function | Joint Kit, drive shaft |
Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.51 kg |
Outer diameter | 90.175 mm |
Type | Piston, air compressor |
Function | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Material | Aluminium |
Outer diameter | 60 mm |
Steering arm type | Control Arm |
Thread Length | 32 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.4 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Inner diameter | 10 mm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12580)
- 1x Febi Screw (37112)
- 1x Febi Washer (36932)
- 1x Febi Nut (37347)
- 1x Febi Nut (37223)
Important compatibility info
Material | Cast Aluminium |
Number of Teeth | 24 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.67 kg |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.055 kg |
Placement on Vehicle | Rear Axle Right |
Length | 1105 mm |
Paired article numbers | 38369 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Weight | 1.85 kg |
Type | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.79 kg |
Function | Radiator Hose |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Inner diameter | 20 mm. 26 mm. 32 mm |
Colour | Black |
Type | Radiator Hose |
Wall Thickness | 4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Cap, oil filter housing |
Type | Cap, oil filter housing |
Tightening Torque | 25 Nm |
Weight | 0.180 kg |
Outer diameter | 92.5 mm |
Height | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 28 mm |
Width | 133 mm |
Colour | Orange |
Rated Power | 18 W |
Cable Length | 1500 mm |
Voltage from | 9 V |
Number of circuits | 4 |
Voltage to | 30 V |
Protection Type (IP Code) | IP67 |
Fulfils ECE norm | R65, R10 |
Housing material | Aluminium |
Temperature range from | -40 °C |
Temperature range to | 65 °C |
Function | Strobe-type Beacon |
Weight | 0.180 kg |
Inspection Tag | EMC, SAE |
Light Design | LED |
Depth | 17 mm |
Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023