Important compatibility info
Distance of fastening bolts | 110 mm |
Height | 65 mm |
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Suspension Strut Support Mount |
Inner diameter | 10 mm |
Paired article numbers | FSM5221 |
Important compatibility info
Inner diameter 1 | 30 mm |
Inner diameter 2 | 34 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Colour | Black |
Material | AEM (Ethylene Acrylate Rubber) |
Placement on Vehicle | Rear, Upper, Right |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2002S)
Important compatibility info
Colour | Black |
Material | PE (Polyethylene) |
Inner diameter 1 | 56 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 2 | 56 mm |
Type | Charge Air Hose |
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Inner diameter 2 | 38 mm |
Function | Intake Hose, air filter |
Type | Intake Hose, air filter |
Colour | Black |
Inner diameter 1 | 38 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
Placement on Vehicle | Front Axle |
Type | Tie Rod |
Function | Tie Rod |
Pipe Diameter | 62 mm |
Length | 1022 mm |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Thread Type | with left-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR4121 |
Important compatibility info
Axle Joint Thread Type | with right-hand thread, with external thread |
Axle Joint Length | 239 mm |
Thread Measurement 2 | M12X1.5 |
Length | 239 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 342 mm |
Thread Measurement 1 | M16X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 342 mm |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Important compatibility info
Axle Joint Length | 243 mm |
Thread Measurement 2 | M16X1.5 |
Thread Measurement 1 | M16X1.5 |
Length | 243 mm |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 94 mm |
Outer diameter 1 | 140 mm |
Inner diameter 1 | 26 mm |
Additional Information 2 | with integrated ABS sensor |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Bearing Code | Gen 1 |
Replaces | BWK121 |
Inner diameter 1 | 35 mm |
Outer diameter 1 | 66 mm |
Only in connection with | BHN207, FHN207 |
Width 1 | 37 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Inner diameter 1 | 30 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Auxiliary water pump (heating water circuit) |
Port / Connector type | 2 PIN |
Operating Mode | Electronic |
Type | Auxiliary water pump (heating water circuit) |
Voltage | 12 V |
Important compatibility info
Number of Clips | 2 |
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Thickness/Strength 1 | 15.8 mm |
Type | Brake Pad Set, disc brake |
Brake System | Ate - Teves |
Wear Warning Contact | not prepared for wear warning indicator |
Height 1 | 57.7 mm |
Height 2 | 55.7 mm |
Width 1 | 122.8 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 881 mm |
External Teeth, Wheel Side | 25 |
External Teeth, Diff.Side | 25 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Inner diameter | 11 mm |
Height | 117 mm |
Important compatibility info
Function | Brake Disc |
Centering Diameter | 60 mm |
Minimum thickness | 24 mm |
Outer diameter | 276 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Quantity Unit | Set |
Brake Disc Thickness | 26 mm |
Height | 45.5 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Important compatibility info
Height | 114 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Inner diameter | 10 mm |
Type | Mounting, engine |
Placement on Vehicle | Lower Right |
Important compatibility info
Length 1 | 965 mm |
Function | Cable Pull, manual transmission |
Length 2 | 653 mm |
Length 3 | 956 mm |
Length 4 | 634 mm |
Type | Cable Pull, manual transmission |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023