Important compatibility info
Placement on Vehicle | Front Axle Right, transmission sided |
External Teeth, Diff.Side | 27 |
Length | 187 mm |
Type | Joint Kit, drive shaft |
Thread Size | 27 |
Seal Diameter | 38 mm |
Function | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 24 |
Important compatibility info
Function | Drive Shaft |
Length | 645 mm |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
External Teeth, Wheel Side | 38 |
Diameter 2 | 108 mm |
Important compatibility info
External Teeth, Wheel Side | 36 |
External Teeth, Diff.Side | 26 |
Length | 859 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Function | Tie Rod End |
Placement on Vehicle | Front Axle Right |
Thread Measurement 2 | M16x1.5 |
Paired article numbers | FTR6235 |
Thread Type | with right-hand thread |
Thread Size | M10x1.5 |
Length | 135 mm |
Type | Tie Rod End |
Important compatibility info
Length 1 | 1786 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Length 1 | 1677 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Function | Cable Pull, parking brake |
Length 3 | 1960 mm |
Type | Cable Pull, parking brake |
Length 4 | 1085 mm |
Length 1 | 965 mm |
Length 2 | 518 mm |
Important compatibility info
Length 2 | 875 mm |
Length 1 | 1115 mm |
Function | Cable Pull, manual transmission |
Number of Gears | for forwards gear |
Type | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Centre |
Function | Suspension, propshaft |
Inner diameter | 30 mm |
Diameter | 103 mm |
Width | 30 mm |
Height | 107 mm |
Type | Suspension, propshaft |
Important compatibility info
Inner diameter | 12 mm |
Diameter | 45 mm |
Length | 57 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6074 |
Important compatibility info
Inner diameter | 14.3 mm |
Diameter | 70.3 mm |
Length | 70 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6352 |
Important compatibility info
Inner diameter | 14 mm |
Diameter | 43.5 mm |
Length | 80 mm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle, Left, Right, Rear |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6628 |
Important compatibility info
Inner diameter | 21 mm |
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Bushing, axle cross member |
Placement on Vehicle | Front Axle, Left, Right |
Type | Bushing, axle cross member |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Inner diameter | 18 mm |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Front Axle, Left, Right |
Important compatibility info
Inner diameter 2 | 42 mm |
Inner diameter 1 | 50 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Function | Charge Air Hose |
Port / Connector type | OE PUSH CONNECTOR |
Colour | Black |
Replaces | BTH1102 |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1105S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2007S)
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 2 | 47 mm |
Colour | Black |
Inner diameter 1 | 47 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Inner diameter 2 | 82 mm |
Colour | Black |
Inner diameter 1 | 82 mm |
Function | Intake Hose, air filter |
Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
Length | 125 mm |
Cone Size | 30 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Measurement 1 | M24X1.5 |
Thread Type | with right-hand thread |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023