Important compatibility info
Inner diameter | 25.4 mm |
Function | Brake Master Cylinder |
Weight | 0.595 kg |
Material | Aluminium |
Additional Information | with gasket/seal |
Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Length | 340 mm |
Height | 45 mm |
Width | 300 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Pressure | 165 bar |
Function | Hydraulic Pump, steering |
Rotation Direction | Anticlockwise rotation |
Number of Connectors / Ports | 2 |
Mounting points diameter | 11 mm |
Internal Thread Size | M26 x 1,5, M18 x 1,5 |
Hole Spacing | 104 mm |
Weight | 3.425 kg |
Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head, air compressor |
Type | Cylinder Head, air compressor |
Additional Information 2 | with bolts/screws |
Weight | 0.918 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided |
Material | MVQ (silicone rubber) |
Outer diameter | 118 mm |
Inner diameter | 95 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.110 kg |
Type | Shaft Seal, crankshaft |
Thickness | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 41 |
Weight | 0.760 kg |
Type | Gear, air compressor |
Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter, automatic transmission |
Weight | 0.240 kg |
Type | Hydraulic Filter, automatic transmission |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 250 mm |
Function | Cable Repair Kit, tailgate |
Number of circuits | 8 |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Rotor Style | Solid |
Weight | 3.280 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 239 mm |
Thickness | 48 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 61 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Weight | 7.33 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 280 mm |
Thickness | 48 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 71.1 mm |
Surface | Coated |
Number of mounting bores | 3 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 20 mm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Weight | 0.38 kg |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Height | 100 mm |
Outer diameter | 74 mm |
Inner diameter | 18 mm |
Filter type | Filter Insert |
Type | Fuel filter |
Function | Fuel filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 77 mm |
Filter type | Filter Insert |
Function | Air Filter |
Outer diameter | 151 mm |
Height | 168 mm |
Type | Air Filter |
Weight | 0.123 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 1.432 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
Important compatibility info
Weight | 0.036 kg |
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 26 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Weight | 0.420 kg |
Length | 1940 mm |
Placement on Vehicle | Left Rear, Right Rear |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 125 mm |
Outer diameter | 125 mm |
Additional Information 2 | without wheel bearing |
Type | Wheel Hub |
Bolt Hole Circle Diameter | 100 mm |
Inner diameter | 27 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Hub |
Weight | 1.580 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.640 kg |
Placement on Vehicle | Front Axle |
Length | 155.1 mm |
Width | 68.6 mm. 64.6 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip, with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 0.648 kg |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 174203 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.127 kg |
Material | Plastic |
Outer diameter | 60 mm |
Mounting points diameter | 8 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.046 kg |
Function | Sensor, exhaust gas temperature |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Cable Length | 400 mm |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1813.L5 |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Weight | 2.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Weight | 3.34 kg |
Paired article numbers | 175410 |
External Thread Size | M14 x 1,5 |
Material | Aluminium |
Placement on Vehicle | Lower, Front Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with bearing, with screw, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174666)
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Housing length | 319.5 mm |
Mounting points diameter | 18 mm |
Weight | 0.325 kg |
Placement on Vehicle | both sides |
Length | 519 mm |
Eject Force | 625 N |
Stroke | 174 mm |
Housing Diameter | 19 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 1 | 11 mm |
Material | Rubber |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Weight | 0.07715 kg |
Length | 155 mm |
Inner diameter 2 | 44 mm |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (18043)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
Important compatibility info
Weight | 0.3 kg |
Function | Tensioner, timing belt |
Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 40 mm |
External Thread Size | M12 x 1,5 |
Weight | 0.075 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 61 mm |
Material | Steel |
Outer diameter | 22.2 mm |
Spanner Size | 17 |
Surface | Zink flake coated |
Thread Length | 20 mm |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10.9 |
Shaft Length | 20 mm |
Wheel Fastening | Ball seat A/G |
Function | Wheel Bolt |
Type | Wheel Bolt |
Rims | for light alloy rims |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 669 mm |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Weight | 0.030 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.962 kg |
Function | Repair Set, propshaft centre bearing |
Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31851)
- 1x Febi Protective Cover, propshaft centre bearing (171015)
- 1x Febi Protective Cover, propshaft centre bearing (171017)
- 1x Febi Circlip (170445)
Important compatibility info
Weight | 0.871 kg |
Voltage | 12 V |
Placement on Vehicle | Rear |
Number of Connectors / Ports | 4 |
Type | Wiper Motor |
Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Weight | 4.6 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 724 mm |
Min. Length | 446 mm |
Pipe Diameter | 70 mm. 51 mm |
Mounting points diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.111 kg |
External Thread Size | M10 x 1,5 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Function | Brake Hose |
Length | 305 mm |
Additional Information 2 | with banjo bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 135 mm |
Thread Type | with right-hand thread |
Cone Size | 38 mm |
Pipe Diameter | 50 mm |
Function | Tie Rod End |
Weight | 3.120 kg |
Paired article numbers | 19046 |
External Thread Size | M38 x 1,5, M30 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Outer diameter | 300 mm. 190 mm |
External Thread Size | M12 x 1,5, M16 x 2, M22 x 1,5 |
Additional Information | without piston |
Weight | 6.500 kg |
Type | Bellow, air suspension |
Thickness | 430 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.043 kg |
Placement on Vehicle | Front Axle |
Length | 41 mm |
Width | 45 mm |
Material | Rubber |
Thickness | 42 mm |
Inner diameter | 22 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Material | Plastic |
Paired article numbers | 24886 |
Colour | Black |
Function | Exterior Door Handle |
Weight | 0.780 kg |
Type | Exterior Door Handle |
Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Length | 87 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.220 kg |
External Thread Size | M10 x 1,5 |
Spanner Size | 15, 16 |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Valve type | Switch Valve |
Weight | 1.07 kg |
Type | Switch, splitter gearbox |
Function | Switch, splitter gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.090 kg |
Inner diameter | 13 mm |
Material | Rubber/Metal |
Outer diameter | 35 mm |
Thickness | 40 mm |
Width | 35 mm |
Length | 35 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Function | Door Lock, driver cab |
Weight | 2.16 kg |
Type | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.45 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Rear |
for OE number | 52049391 |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Weight | 3.5 kg |
Paired article numbers | 31601 |
Function | Adjuster, braking system |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
for OE number | 39300-03000 |
Type | Sensor, intake manifold pressure |
Number of Connectors / Ports | 4 |
Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Sensor, wheel speed |
Weight | 0.056 kg |
Type | Sensor, wheel speed |
Paired article numbers | 175336 |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 455 N |
Placement on Vehicle | both sides |
Length | 500 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Stroke | 200 mm |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 276.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hole Spacing | 75 mm |
Material | Metal |
Weight | 0.004 kg |
Type | Gasket, EGR valve |
Function | Gasket, EGR valve |
Inner diameter | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Pulley, crankshaft |
Outer diameter | 168 mm |
Additional Information 2 | with bolts/screws |
Inner diameter | 94 mm |
Weight | 1.57 kg |
Type | Belt Pulley, crankshaft |
Parameter | 4PK + 6PK |
Width | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (49589)
Important compatibility info
Placement on Vehicle | Left Rear |
Length | 2055 mm |
Paired article numbers | 106946 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with dryer |
Weight | 2.165 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 320 mm |
Core Width | 735 mm |
Core Depth | 16 mm |
Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023