Important compatibility info
Placement on Vehicle | Rear Axle, both sides |
Function | Pressure Accumulator, pneumatic suspension |
Capacity | 0.4 l |
Weight | 1.651 kg |
Type | Pressure Accumulator, pneumatic suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.717 kg |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 28.5 mm |
Material | Metal |
Outer diameter | 60 mm |
Inner diameter | 10 mm |
Function | Deflection Pulley/Guide Pulley, timing belt |
Type | Deflection Pulley/Guide Pulley, timing belt |
Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Rear |
Material | FPM (fluoride rubber) |
Outer diameter | 75 mm |
Thickness | 10 mm |
Inner diameter | 43 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 298 mm |
Housing Diameter | 19 mm |
Eject Force | 510 N |
Stroke | 83 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 177.5 mm |
Weight | 0.189 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 5.5 mm |
Thickness | 43 mm |
Width | 53 mm |
Length | 79 mm |
for OE number | 51.12505.0033 |
Weight | 0.195 kg |
Function | Pressure Control Valve, common rail system |
Type | Pressure Control Valve, common rail system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.29 kg |
Paired article numbers | 27986 |
Placement on Vehicle | Front Axle Left |
Length | 79 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Silver |
Quality/ Grade | 10 |
DIN / ISO | 985 |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.830 kg |
Placement on Vehicle | Front Axle |
Length | 157 mm |
Width | 58.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.7985 kg |
Hole Spacing | 64 mm |
Outer diameter | 186 mm |
Thickness | 108 mm |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 69 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Weight | 0.03 kg |
Type | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Rear, inner, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 74 mm |
Thickness | 80 mm |
Inner diameter | 12 mm |
Weight | 0.501 kg |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Additional Information 2 | Control Unit/Software must be trained/updated |
Housing Type | with housing |
Material | Plastic |
Number of Connectors / Ports | 5 |
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Height | 80 mm |
Outer diameter | 114 mm |
Spanner Size | 36 |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Screen Filter, Spin-on Filter |
Width | 142 mm |
Outer diameter | 70 mm |
Additional Information 2 | with oil sump gasket, with seal ring |
Weight | 0.638 kg |
Internal Thread Size | M20 x 1,5 |
Length | 296.9 mm |
Height | 89 mm. 103 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.288 kg |
Length | 2418 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 2.240 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.235 kg |
Paired article numbers | 39041 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (19935)
- 1x Febi Tie Rod End (10659)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Thickness | 79.2 mm |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Housing Type | with housing |
Additional Information | with gasket/seal |
Opening Temperature | 87 °C |
Weight | 0.335 kg |
Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Weight | 1.43 kg |
for OE number | 51855515 |
Function | Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.135 kg |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Resistance | 1200 Ohm |
Function | Sensor, wheel speed |
Cable Length | 1680 mm |
Number of Connectors / Ports | 2 |
Length | 1780 mm |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023