Important compatibility info
Length | 410 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Front Axle Right |
Additional Information | with banjo fitting |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Thread Type | with internal thread |
Mounting Bolt Thread Size | M10x1 |
Important compatibility info
Bore Diameter 1 | 13.6 mm |
Bore Diameter 2 | 17.6 mm |
Number of Rivet Holes | 3 |
Version | Fitting Kit |
Thread Measurement 1 | M12x1.25 |
Bore Diameter | 8.3 mm |
Mounting Type | Bolted |
Function | Ball Joint |
Number of mounting bores | 3 |
Type | Ball Joint |
Steering arm type | for control arm |
Important compatibility info
Hub Profile | 22.4 x 20 |
Outer diameter | 240 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 3 -part |
Number of Teeth | 20 |
Replaces | HK2219 |
Important compatibility info
Number of Rivet Holes | 2 |
Version | Fitting Kit |
Thread Measurement 1 | M14x1.5 |
Function | Ball Joint |
Mounting Type | Bolted |
Number of mounting bores | 2 |
Type | Ball Joint |
Steering arm type | for control arm |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle |
Type | Accessory Kit, disc brake pad |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 22.2 x 20.4 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Teeth | 28 |
Type | Clutch Kit |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Thickness/Strength 1 | 16 mm |
Number of wear indicators | 2 Per Axle |
Type | Brake Pad Set, disc brake |
Height 1 | 54 mm |
Width 1 | 167.5 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Number of Teeth | 14 |
Replaced by | HKT1497 |
Important compatibility info
Opening Temperature | 82 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Thermostat, coolant |
Housing material | Plastic |
Housing Type | with housing |
Opening Temperature | 88 °C |
Type | Thermostat, coolant |
Important compatibility info
Replaces | BCA5655 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Diameter | 16 mm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5677 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5258)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6031)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6033)
Important compatibility info
Length 1 | 976 mm |
Length 2 | 995 mm |
Length 3 | 1334 mm |
Length 4 | 1340 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6868 |
Important compatibility info
Function | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Length | 77 mm |
Inner diameter 2 | 64 mm |
Inner diameter 1 | 33 mm |
Material | Thermoplast |
Lubrication | with grease lubrication |
Type | Bellow Kit, drive shaft |
Important compatibility info
Rod/Strut | Coupling Rod |
Pipe Diameter | 32 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle |
Length | 150 mm |
Important compatibility info
Thread Measurement 2 | M10X1.25 |
Thread Size | M10X1.25 |
Length | 190 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M12X1.75 |
Thread Size | M12X1.75 |
Length | 116 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6953HD |
Placement on Vehicle | Rear Axle Right |
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Length | 81 mm |
Height | 43 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Important compatibility info
Length | 270 mm |
Height | 46 mm |
Width | 250 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023