Important compatibility info
Length 1 | 1493 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Function | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 23 |
Length | 185 mm |
Type | Joint Kit, drive shaft |
Seal Diameter | 35 mm |
External Teeth, Diff.Side | 20 |
Placement on Vehicle | Front Axle Right, transmission sided |
Important compatibility info
Technical Information Number | Middle groove |
Thread Size | M24X1,5 |
Length | 165 mm |
Internal Teeth, wheel side | 23 |
External Teeth, Wheel Side | 27 |
Function | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 44 |
Seal Diameter | 56 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Additional Information 2 | with groove |
Type | Joint Kit, drive shaft |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 179 mm |
Function | Tie Rod End |
Type | Tie Rod End |
Thread Measurement 2 | M14x1.5 |
Thread Measurement 1 | M10x1.25 |
Important compatibility info
External Teeth, Wheel Side | 26 |
External Teeth, Diff.Side | 24 |
Function | Drive Shaft |
Length | 973 mm |
Transmission Type | CVT Automatic Transmission (stepless) |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1267)
Important compatibility info
Length 1 | 1993 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Length 1 | 1304 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Placement on Vehicle | Left Rear |
Length 1 | 1674 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Length | 184 mm |
Inner diameter 1 | 9 mm |
Inner diameter 2 | 44 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with clamps |
Material | Rubber |
Important compatibility info
Diameter | 60 mm |
Outer diameter | 68 mm |
Inner diameter | 16 mm |
Function | Mounting, control/trailing arm |
Length | 58 mm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK5998 |
Important compatibility info
Inner diameter | 16.2 mm |
Outer diameter | 46 mm |
Diameter | 44 mm |
Length | 70 mm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle, Left, Right, inner, Lower |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6553 |
Important compatibility info
Required quantity | 2 |
Length | 1305 mm |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Important compatibility info
Inner diameter | 12.2 mm |
Diameter | 33.4 mm |
Length | 53 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6859 |
Placement on Vehicle | Front Axle, Left, Right, Front |
Important compatibility info
Inner diameter | 18 mm |
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
Additional Information 2 | with bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5150 |
Important compatibility info
Thread Type | with internal thread |
Additional Information | with banjo fitting |
Thread Measurement 1 | M10x1 |
Length 2 | 287 mm |
Type | Brake Hose |
Function | Brake Hose |
Length 1 | 293 mm |
Important compatibility info
Colour | Black |
Placement on Vehicle | Mass Air Flow Sensor to turbocharger |
Inner diameter 1 | 60 mm |
Inner diameter 2 | 38 mm |
Material | Plastic |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
Important compatibility info
Outer diameter 2 | 60 mm |
Outer diameter 1 | 58 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Type | Ball Head, gearshift linkage |
Function | Ball Head, gearshift linkage |
Important compatibility info
Thread Measurement 1 | M18x1.5 |
Thread Type | with right-hand thread, with external thread |
Function | Tie Rod End |
Type | Tie Rod End |
Placement on Vehicle | Front Axle Left, Front Axle Right, inner |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023