Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Placement on Vehicle | Front Axle |
Length | 141.7 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Function | Brake Pad Set, disc brake |
Width | 59.7 mm |
Weight | 1.750 kg |
Type | Brake Pad Set, disc brake |
Manufacturer | NISSAN RENAULT |
Model | KADJAR KOLEOS QASHQA QASHQAI X-TRAIL |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.4 kg |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Inner diameter | 32 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Outer diameter | 89 mm |
Width | 55 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.053 kg |
Type | Gasket, timing case cover |
Function | Gasket, timing case cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, crankshaft (31329)
- 1x Febi Gasket, housing cover (crankcase) (48868)
- 1x Febi Gasket, timing case (48869)
Important compatibility info
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Weight | 2.678 kg |
Inner diameter | 29 mm |
Outer diameter | 85 mm |
Placement on Vehicle | Front Axle |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Width | 45 mm |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 175148 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.212 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 42 |
Additional Information 2 | Requires special tools for mounting |
Timing Chain Size | G67HP, G67HR, G67AM |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Function | Relay, glow plug system |
Number of Connectors / Ports | 5 |
Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10823)
- 1x Febi Rolling Bearing, suspension strut support mount (10089)
Important compatibility info
Weight | 1.17 kg |
Housing material | Aluminium |
Additional Information | with gasket/seal |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Weight | 7.52 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 298 mm |
Thickness | 45.6 mm |
Brake Disc Thickness | 26 mm |
Minimum thickness | 24 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Spanner Size | 17 |
Weight | 0.050 kg |
Cable Length | 293 mm |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Weight | 0.305 kg |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fastening Bolt, stabiliser bar (06063)
- 1x Febi Joint Bearing, connector rod (06066)
- 2x Febi Seal Ring (06069)
- 2x Febi Sleeve, stabiliser mounting (06064)
- 1x Febi Washer (06067)
- 1x Febi Washer (06068)
- 1x Febi Nut (01563)
- 1x Febi Grease Nipple (01096)
- 2x Febi Circlip (06065)
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.86 kg |
Paired article numbers | 179232 |
Placement on Vehicle | Right Rear |
Additional Information | with fastening/mounting material, without electric motor |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bushing, leaf spring |
Length | 68 mm |
Material | Rubber/Metal |
Outer diameter | 50 mm |
Inner diameter | 14.5 mm |
Weight | 0.271 kg |
Type | Bushing, leaf spring |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 430 mm |
Outer diameter | 480.5 mm |
Width | 22 mm |
Weight | 5.500 kg |
Number of Teeth | 158 |
Function | Ring Gear, flywheel |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Grey Cast Iron |
Material | Grey Cast Iron |
Number of Wings | 12 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Weight | 7.075 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Inner diameter | 49.5 mm |
Material | Rubber/Metal |
Length | 95 mm |
Placement on Vehicle | Rear Axle Upper, inner |
Outer diameter | 78 mm. 91 mm |
Weight | 0.56 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | slotted/perforated, internally vented |
Weight | 12.45 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 350 mm |
Thickness | 51 mm |
Brake Disc Thickness | 32 mm |
Minimum thickness | 30 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Machining | High-carbon |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 19 mm |
Length | 96 mm |
Function | Bush, spring eye |
Weight | 0.503 kg |
Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
DIN / ISO | 12098, 1185, 3731 |
Number of Connectors / Ports | 15. 7 |
Version | OE Standard |
Function | Adaptor, electric filament |
Port / Connector type | 15 to 2x7 |
Assignment plan scheme number | 4 |
Type | Adaptor, electric filament |
Weight | 0.552 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023