Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 98 mm |
Inner diameter 2 | 86 mm |
Inner diameter 1 | 27 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 99 mm |
Inner diameter 2 | 65 mm |
Inner diameter 1 | 25 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 65 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6985 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Length | 1170 mm |
Function | Tie Rod |
Type | Tie Rod |
Placement on Vehicle | Front Axle |
Important compatibility info
Thread Measurement 2 | M12x1.75 |
Thread Size | M12x1.75 |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Length | 304 mm |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Length | 136 mm |
Height | 130 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Inner diameter | 11 mm |
Type | Mounting, engine |
Placement on Vehicle | Upper Right |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Inner diameter | 30 mm |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Rear Axle |
Important compatibility info
Length | 213 mm |
Height | 70 mm |
Width 1 | 218 mm |
Width 2 | 129 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Shape/Form | tetragonal |
Important compatibility info
Placement on Vehicle | Lower Right |
Inner diameter | 10 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Outer diameter | 8 mm |
Length | 130 mm |
Important compatibility info
Length | 244 mm |
Height | 41 mm |
Width | 147 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Important compatibility info
Length | 224 mm |
Height | 30 mm |
Width | 235 mm |
Function | Filter, cabin air |
Type | Filter, cabin air |
Filter type | Particulate Filter |
Paired article numbers | BFC1270 |
Important compatibility info
Height | 118 mm |
Outer diameter | 48 mm |
Filter type | In-Line Filter |
Inlet Diameter | 6 mm |
Outlet Diameter | 6 mm |
Function | Fuel filter |
Type | Fuel filter |
Important compatibility info
Outer diameter | 76 mm |
Thread Size | UNF 13/16''-16 |
Filter type | Spin-on Filter |
Function | Oil Filter |
Type | Oil Filter |
Height | 93 mm |
Valve type | Pressure Limiting Valve |
Additional Information 2 | with one anti-return valve |
Important compatibility info
Type | Fastening Clamp, charge air hose |
Function | Fastening Clamp, charge air hose |
Diameter To | 66 mm |
Diameter From | 70 mm |
Quantity | 1 |
Important compatibility info
Seal Diameter | 44.1 mm |
Type | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 32 |
Length | 116 mm |
Function | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Right, transmission sided |
External Teeth, Diff.Side | 28 |
Important compatibility info
Length 1 | 1143 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Important compatibility info
Additional Information 2 | without banjo bolt |
Thread Measurement 1 | M10x1 |
Function | Brake Hose |
Thread Type | with internal thread |
Placement on Vehicle | Rear Axle, Right, outer |
Type | Brake Hose |
Additional Information | with banjo fitting |
Important compatibility info
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 36 |
Type | Joint Kit, drive shaft |
Length | 161 mm |
External Teeth, Wheel Side | 30 |
Number of Teeth, ABS ring | 48 |
Thread Size | M22X1,5 |
Additional Information 2 | with groove |
Seal Diameter | 65 mm |
Important compatibility info
Length 1 | 1170 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023