Important compatibility info
Weight | 0.170 kg |
Type | Bush, kingpin |
Inner diameter | 45 mm |
Outer diameter | 52 mm |
Function | Bush, kingpin |
Material | Brass |
Height | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.256 kg |
Additional Information | with Split Pin |
External Teeth, Wheel Side | 28 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 101.1 mm |
Additional Information 2 | with nut |
Thread Size | M24x2,0 |
Paired article numbers | 181099 |
Wheel Sided Joint Diameter | 102 mm |
External Teeth, Diff.Side | 41 |
Min. Length | 755 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 27 mm |
Opening Temperature | 82 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Housing Type | with housing |
Weight | 0.35 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Placement on Vehicle | Upper, Rear Axle Left, Rear, outer |
Paired article numbers | 184959 |
Weight | 1.240 kg |
Material | Sheet Steel |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Placement on Vehicle | Rear Axle |
Outer diameter | 325 mm |
Thickness | 38 mm |
Brake Disc Thickness | 20 mm |
Minimum thickness | 18 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 64.5 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Weight | 7.21 kg |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.007 kg |
Material | HNBR (hydrogenated nitrile butadiene rubber) |
Function | Gasket, oil cooler |
Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size 2 | 17 mm |
Additional Information | with lock nut, with rubber mounts |
External Thread Size | M12 x 1,75 |
Steering arm type | Control Arm |
Paired article numbers | 185763 |
Cone Size | 14 mm |
Placement on Vehicle | Front Axle Right, Upper |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Material | Steel |
Weight | 3.110 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 180234 |
Weight | 0.187 kg |
Type | Brake Hose |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Additional Information | with holder |
Placement on Vehicle | Front Axle Right |
Length | 693 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 169 mm |
Spanner Size | 46 |
Weight | 1.040 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 522 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 46 mm |
Mounting points diameter | 19 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 10.062 kg |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Length | 665 mm |
Weight | 2.0 kg |
Type | Gas Spring, boot/cargo area |
Placement on Vehicle | Right Rear |
Housing Diameter | 39 mm |
Stroke | 109 mm |
Extra Description | febi Plus |
Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 1 |
Weight | 0.197 kg |
Type | Pressure converter, turbocharger |
Function | Pressure converter, turbocharger |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.842 kg |
Number of Teeth | 33 |
Placement on Vehicle | Intake Side, Left |
Type | Camshaft Adjuster |
Paired article numbers | 176728 |
Extra Description | febi Plus |
Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 339 mm |
Weight | 0.740 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 810 mm |
Min. Length | 495 mm |
Pipe Diameter | 80 mm. 70 mm |
Mounting points diameter | 16 mm. 20 mm |
Piston conrod diameter | 16 mm |
Function | Shock Absorber |
Weight | 6.6 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 87 mm |
Width | 28 mm |
Outer diameter | 36 mm |
Thickness | 35 mm |
Inner diameter | 7 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
Weight | 0.24 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.212 kg |
Length | 115 mm |
Width | 28.7 mm |
Material | Steel |
Outer diameter | 34 mm |
Inner diameter | 12 mm. 13.5 mm |
Paired article numbers | 11022 |
Rod/Strut | Coupling Rod |
Surface | Zinc-coated |
Placement on Vehicle | Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 41 mm |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178761 |
Weight | 1.73 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Weight | 0.922 kg |
Material | PA (polyamide) |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length from grip collar to min. marking | 543 mm |
Length from grip collar to max. marking | 525 mm |
Function | Oil Dipstick |
Outer Length | 599 mm |
Weight | 0.027 kg |
Extra Description | febi Plus |
Type | Oil Dipstick |
Colour | Yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023