Important compatibility info
Length | 1045 mm |
Function | Cable Pull, clutch control |
Type | Cable Pull, clutch control |
Important compatibility info
Length 1 | 1216 mm |
Function | Cable Pull, manual transmission |
Length 2 | 929 mm |
Length 3 | 1297 mm |
Length 4 | 972 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Bellow Kit, steering |
Length | 165 mm |
Inner diameter 1 | 10 mm |
Inner diameter 2 | 50 mm |
Type | Bellow Kit, steering |
Material | Rubber |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with clamps |
Important compatibility info
Function | Bellow Kit, steering |
Material | Thermoplast |
Length | 202 mm |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 46 mm |
Type | Bellow Kit, steering |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with clamps |
Important compatibility info
Inner diameter | 20.8 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6319 |
Important compatibility info
Function | Suspension Strut Support Mount |
Additional Information 2 | without bearing |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5454 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Inner diameter 1 | 49 mm |
Inner diameter 2 | 31 mm |
Function | Charge Air Hose |
Colour | Black |
Placement on Vehicle | Rear, Left, Lower |
Material | Silicone |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Function | Charge Air Hose |
Inner diameter 1 | 58 mm |
Inner diameter 2 | 60 mm |
Colour | Black |
Material | Polychloroprene (Neoprene) |
Type | Charge Air Hose |
Important compatibility info
Thread Measurement 2 | M20X1.5 |
Type | Centre Rod Assembly |
Thread Measurement 1 | M30X1.5 RHT |
Length | 1005 mm |
Rod/Strut | Push Rod |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Important compatibility info
Axle Joint Thread Type | with right-hand thread, with external thread |
Thread Measurement 2 | M14X1.5 |
Length | 328 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 328 mm |
Type | Inner Tie Rod |
Important compatibility info
Axle Joint Thread Type | with right-hand thread, with external thread |
Thread Measurement 2 | M14X1.5 |
for steering manufacturer | SMI |
Length | 315 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 315 mm |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5571 |
Important compatibility info
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5838 |
Placement on Vehicle | Front Axle Left, outer |
Important compatibility info
Housing Type | without housing |
Diameter | 52 mm |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | without gaskets/seals |
Opening Temperature | 82 °C |
Important compatibility info
Quantity | 1 |
Wiper blade type | Bracket wiper blade with spoiler |
Length | 650 mm |
Number of adapters | 2 |
Length | 26 Inch |
Function | Wiper Blade |
Type | Wiper Blade |
Important compatibility info
Outer diameter 2 | 78 mm |
Function | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Outer diameter 1 | 140 mm |
Placement on Vehicle | Rear Axle |
Width 1 | 63 mm |
Type | Wheel Bearing Kit |
Important compatibility info
Inner diameter 1 | 32 mm |
Outer diameter 1 | 129 mm |
Width 1 | 59 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Number of Teeth, ABS ring | 29 |
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 2 |
Important compatibility info
Additional Information | with gaskets/seals |
Water Pump Pulley Diameter | 48 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Water Pump Pulley Diameter | 60 mm |
Impeller Diameter | 57 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Height | 74.5 mm |
Impeller Diameter | 66 mm |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023