Important compatibility info
Weight | 1.010 kg |
Function | Repair Set, propshaft centre bearing |
Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31851)
- 1x Febi Protective Cover, propshaft centre bearing (171015)
- 1x Febi Protective Cover, propshaft centre bearing (171021)
- 1x Febi Boot, propshaft (36794)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38762)
Important compatibility info
Inner diameter | 10 mm |
Weight | 0.012 kg |
Height | 47 mm |
Outer diameter | 30 mm |
Type | Hydraulic Filter, automatic transmission |
Function | Hydraulic Filter, automatic transmission |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1051 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.101 kg |
Number of Ribs | 7 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information 2 | Requires special tools for mounting |
Chemical Properties | Elastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 87.7 mm |
Outer diameter | 87 mm |
Additional Information 2 | with seal ring |
Spanner Size | 32 |
Weight | 0.112 kg |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Manufacturer's restriction oil filter housing | UFI |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Rear Axle, Outer |
Function | Fastening Bolt, stabiliser bar |
Outer diameter | 22 mm |
Length | 100 mm. 75 mm |
Type | Fastening Bolt, stabiliser bar |
Weight | 0.28 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 2.32 kg |
Length | 433 mm |
Spanner Size | 19 |
Type | Oil sump |
Function | Oil sump |
Extra Description | febi Plus |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Placement on Vehicle | both sides |
Length | 375 mm |
Housing Diameter | 18 mm |
Eject Force | 340 N |
Stroke | 144 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 206 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Selector-/Shift Rod |
Extra Description | febi Plus |
Type | Selector-/Shift Rod |
Weight | 0.865 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 12.08 kg |
Placement on Vehicle | Rear Axle Left |
Length | 263.9 mm |
Width | 147.2 mm |
Thickness | 124 mm |
Paired article numbers | 27575 |
Function | Bush, parabolic spring |
Hole Spacing | 178.9 mm |
Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Weight | 0.475 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 96 |
Type | Timing Chain Kit |
for OE number | 06K 109 158 BS S4 |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (101796)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49535)
Important compatibility info
Weight | 5.772 kg |
External Teeth, Wheel Side | 21 |
Thread Size | M20x1,5 |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Diff.Side | 22 |
Min. Length | 855 mm |
Wheel Sided Joint Diameter | 79.4 mm |
Transmission-side joint diameter | 75.5 mm |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 31599 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Paired article numbers | 106071 |
Placement on Vehicle | Right Front |
Function | Window Regulator |
Weight | 1.5 kg |
Type | Window Regulator |
Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 65 mm |
Width | 48 mm |
Outer diameter | 48 mm |
Thickness | 65 mm |
Inner diameter | 19 mm |
Function | Bushing, axle beam |
Weight | 0.25 kg |
Material | Rubber/Metal |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M12 x 1,5 |
Weight | 0.34 kg |
Function | Pressure Limiting Valve |
Inlet pressure from | 8 bar |
Type | Pressure Limiting Valve |
Opening Pressure | 0.3 bar |
Inner thread 1 | M12 x 1,5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Cable Length | 194 mm |
Weight | 0.054 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | Catalytic Converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.905 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (10356)
- 2x Febi Mounting, control/trailing arm (08905)
- 2x Febi Washer (07755)
- 2x Febi Washer (10357)
- 2x Febi Nut (10358)
- 1x Febi Nut, exhaust manifold (01554)
- 3x Febi Nut (06877)
- 1x Febi Spacer Sleeve (10360)
Important compatibility info
Weight | 0.014 kg |
Rotation Direction | Clockwise rotation |
Height | 6 mm |
Material | ACM (Polyacrylate) |
Outer diameter | 61 mm |
Inner diameter | 44 mm |
Function | Shaft Seal, automatic transmission |
Type | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.03 kg |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
for OE number | A2C53255629 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with spacer plate |
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Weight | 6.790 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023