Proud to be a UK-based company
Contact us
Important compatibility info
| Inner length 1 | 1572 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Weight | 1.230 kg |
| Inner length 2 | 1252 mm |
| Outer length 1 | 1604 mm |
| Outer length 2 | 1856 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.14
Important compatibility info
| Weight | 0.598 kg |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 12566 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.012 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.43
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.7 kW |
| Weight | 3.5 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Outer diameter | 112.7 mm |
| Inner diameter | 57 mm |
| Function | Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Width | 30.4 mm |
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Weight | 1.414 kg |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.39
Important compatibility info
| Weight | 0.096 kg |
| Length | 100 mm |
| Outer diameter | 60 mm |
| Inner diameter | 18 mm |
| Function | Hydraulic Filter, steering |
| Type | Hydraulic Filter, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.88
Important compatibility info
| Weight | 0.54 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 171563 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.35
Important compatibility info
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Additional Information | with counter nut |
| Weight | 0.400 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.11
Important compatibility info
| Weight | 0.07 kg |
| Length | 75 mm |
| Height | 54 mm |
| Width | 75 mm |
| Filter type | Filter Insert, Pre-Filter, with water separator |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.18
Important compatibility info
| Weight | 0.730 kg |
| Function | Throttle body |
| Number of Connectors / Ports | 6. 2 |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.54
Important compatibility info
| Function | Mounting, engine |
| Weight | 1.800 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.34
Important compatibility info
| Placement on Vehicle | Upper Right |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.023 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Paired article numbers | 184146 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.99
Important compatibility info
| Weight | 7.6 kg |
| Length | 795 mm |
| Outer diameter | 79 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 610 mm |
| Pipe Diameter | 47 mm |
| Mounting points diameter | 33 mm |
| Type | Tilt Cylinder, driver cab |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£265.73
Important compatibility info
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Weight | 0.605 kg |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.99
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1185 Ohm |
| Cable Length | 2150 mm |
| Function | Sensor, wheel speed |
| Weight | 0.169 kg |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.92
Important compatibility info
| Weight | 0.625 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 185550 |
| Placement on Vehicle | Rear Axle Left, Upper, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 894 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Weight | 8.4 kg |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Weight | 1.452 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.88
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 33 |
| Internal Teeth, wheel side | 26 |
| Weight | 2.424 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.58
Important compatibility info
| Weight | 3.26 kg |
| External Thread Size | M14 x 1,5 |
| Length | 235 mm |
| Width | 94 mm |
| Outer diameter | 50 mm |
| Thickness | 93.5 mm |
| Type | Unit Injector (UI) |
| Function | Unit Injector (UI) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£713.97
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023