Important compatibility info
Weight | 0.027 kg |
Function | Hose, crankcase ventilation |
for OE number | 119 094 40 82 |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.260 kg |
Placement on Vehicle | Lower Front Axle, both sides |
Length | 33 mm |
Material | Rubber/Metal |
Outer diameter | 60 mm |
Inner diameter | 18 mm. 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (07264)
Important compatibility info
Placement on Vehicle | Left |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.40 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Paired article numbers | 177877 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.707 kg |
Cone Size | 22 mm |
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1054 mm |
Rod/Strut | Push Rod |
Pipe Diameter | 36 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Weight | 6.350 kg |
Cone Size | 30 mm |
Adjustable | not adjustable |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.625 kg |
Length | 1050 mm |
Material | Rubber |
Thickness | 18 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M8 x 1,25 |
Weight | 0.090 kg |
Placement on Vehicle | both sides |
Outer diameter | 50 mm. 46 mm |
Thickness | 79 mm. 34 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Colour Coding | Yellow |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Centre |
Weight | 0.596 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.28 kg |
Placement on Vehicle | Rear Axle |
Length | 338 mm |
Outer diameter | 123 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 10.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 1307 mm |
Function | Cable Pull, parking brake |
Weight | 0.445 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Hose Length | 460 mm |
Placement on Vehicle | Lower Right |
Inner diameter | 41 mm. 49 mm. 55 mm |
Additional Information | with quick coupling |
Function | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Length | 123 mm |
Outer diameter | 67 mm |
Opening Temperature | 75 °C |
Heating / Cooling | with vent hole |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Replaces | 48445 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.83 kg |
Rotation Direction | Anticlockwise rotation |
Number of Connectors / Ports | 2 |
Mounting points diameter | 9.5 mm |
Function | Hydraulic Pump, steering |
Internal Thread Size | M16 x 1,5, M26 x 1,5 |
Type | Hydraulic Pump, steering |
for OE number | 85114316 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Bore Diameter | 16 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.700 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 439 mm |
Max. Length | 439 mm |
Min. Length | 286 mm |
Pipe Diameter | 60 mm. 51 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.28 kg |
Length | 313 mm |
Height | 37 mm |
Width | 263 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 98 mm |
Type | Rubber Buffer, suspension |
Weight | 0.282 kg |
Placement on Vehicle | inner |
Width | 95 mm |
Function | Rubber Buffer, suspension |
Material | Rubber/Metal, PU (Polyurethane) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.65 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Height | 16 mm |
Outer diameter | 404 mm |
Inner diameter | 230 mm |
Paired article numbers | 196015 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 23 mm |
Weight | 0.658 kg |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | 6PK |
Additional Information 2 | with bolts/screws |
Weight | 3.400 kg |
Material | Rubber/Metal |
Outer diameter | 185 mm |
Number of Ribs | 5 |
Inner diameter 1 | 10 mm |
Inner diameter 2 | 45 mm |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (37419)
- 4x Febi Centering Bolt, crankshaft pulley (33076)
Important compatibility info
Material | Metal |
Outer diameter | 80 mm |
Operating Mode | Automatic |
Weight | 2.396 kg |
Type | Belt Tensioner, V-ribbed belt |
Function | Belt Tensioner, V-ribbed belt |
Extra Description | febi Plus |
Width of castor bearing surface | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023