Important compatibility info
External Teeth, Wheel Side | 30 |
Weight | 6.074 kg |
Number of mounting bores | 6 |
Bolt Hole Circle Diameter | 86 mm |
Thread Size | M27x1,5 |
Bore Diameter | 10.5 mm |
Min. Length | 682 mm |
ABS Ring Diameter | 83 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 100 mm |
Placement on Vehicle | Rear Axle Right |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.87 kg |
Additional Information | with gaskets/seals |
Function | Housing, oil cooler |
Width | 265 mm |
Length | 465 mm |
Type | Housing, oil cooler |
Thickness | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Tank, compressed-air system |
Operating Pressure | 15 bar |
Outer diameter | 246 mm |
Internal Thread Size | M22 x 1,5 |
Weight | 6.1 kg |
Material | Steel |
Type | Air Tank, compressed-air system |
Length | 379 m |
Capacity | 15 l |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.151 kg |
Pump Type | Mono Pump |
Number of Connectors / Ports | 2 |
Function | Washer Fluid Pump, headlight cleaning |
Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | after soot particulate filter |
Number of Connectors / Ports | 2 |
Weight | 0.049 kg |
Cable Length | 145 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 610 mm |
Function | Sensor, wheel speed |
Weight | 0.038 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 185646 |
Brake caliper piston diameter | 60 mm |
Function | Brake Caliper |
Weight | 4.2 kg |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 233.5 mm |
Weight | 1.413 kg |
External Thread Size | M22 x 1,5, M28 x 1,5 |
Type | Inner Tie Rod |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Weight | 1.494 kg |
for OE number | 21950-G3000 |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Function | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 488 mm |
Weight | 0.12 kg |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 20 mm. 19 mm |
Length | 204 mm |
Weight | 0.008 kg |
Width | 90 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Function | Repair Kit, brake caliper |
Weight | 0.05 kg |
Type | Repair Kit, brake caliper |
for OE number | 81.50802.6024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without bulb |
Placement on Vehicle | Left Front |
Paired article numbers | 194116 |
Number of Connectors / Ports | 2 |
Weight | 0.09 kg |
Type | Direction Indicator |
Fulfils ECE norm | R6 |
Function | Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Element, parking brake caliper |
Type | Control Element, parking brake caliper |
Weight | 0.580 kg |
Placement on Vehicle | Rear Axle Left |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Paired article numbers | 194745 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket outer diameter | 36 mm |
Gasket inner diameter | 28 mm |
Length | 57 mm |
Height | 52 mm |
Outer diameter | 36 mm |
Colour | White |
Function | Fuel filter |
Weight | 0.049 kg |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Filter type | Pre-filter |
Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.637 kg |
Material | Cast Aluminium |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.011 kg |
Function | Multi-Function Switch |
Number of Connectors / Ports | 12 |
Extra Description | febi Plus |
Type | Multi-Function Switch |
Combi Switch Function | Mirror Adjustment, Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, automatic transmission |
Weight | 1.955 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Paired article numbers | 45078 |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 178172 |
Weight | 1.47 kg |
Function | Brake Caliper |
Type | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Paired article numbers | 180059 |
Weight | 3.517 kg |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.010 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 255 mm |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.392 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 10887 |
Function | Tie Rod End |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.375 kg |
Function | Oil sump |
Type | Oil sump |
Additional Information | without oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Brake caliper piston diameter | 54 mm |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181179 |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Function | Brake Caliper |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with oil drain plug |
Additional Information 2 | with bolts/screws, with overflow pipe, with oil sump gasket |
Filter type | Screen Filter |
Transmission Type | 7-Speed Automatic Transmission, Automatic Transmission |
Weight | 0.475 kg |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Transmission ID | 722.9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter Kit, automatic transmission (107823)
- 1x Febi Screw Plug, oil sump (46332)
- 1x Febi Seal Ring, oil drain plug (04054)
- 6x Febi Bolt, automatic transmission oil tray (46389)
- 1x Febi Overflow Pipe, oil sump (automatic transmission) (102470)
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181659 |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 3.960 kg |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 368 mm |
Cone Size | 18.5 mm |
Function | Tie Rod |
Weight | 1.264 kg |
External Thread Size | M14 x 1,5, M18 x 1,5 |
Type | Tie Rod |
Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.083 kg |
Placement on Vehicle | Front |
Length | 46 mm |
Material | Rubber |
Outer diameter | 68 mm |
Inner diameter | 26 mm |
Function | Rubber Buffer, engine mounting system |
Type | Rubber Buffer, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 3010 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for turbocharger (art. no.) | 192181 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Brake Disc Thickness | 21 mm |
Surface | Coated |
Function | Brake Disc |
Rotor Style | Internally Vented |
Outer diameter | 283 mm |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Weight | 5.025 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Width | 39 mm |
Inner diameter | 22 mm |
Thickness | 44 mm |
Length | 48 mm |
Weight | 0.050 kg |
Placement on Vehicle | Front Axle |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.411 kg |
Placement on Vehicle | Left |
Chain Type | Silent Chain, with chain lock |
Number of Chain Links | 116 |
Timing Chain Size | Z53AI-3 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Material | Rubber |
Function | Gasket, automatic transmission oil sump |
Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.876 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Length | 518 mm |
Material | Sheet Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M26 x 1,5 |
Min. Length | 448 mm |
Weight | 5.915 kg |
Max. Length | 698 mm |
Outer diameter | 70 mm |
Length | 448 mm |
Placement on Vehicle | Front Axle |
Piston conrod diameter | 28 mm |
Function | Slave Cylinder, power steering |
Type | Slave Cylinder, power steering |
Stroke | 250 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 901 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Weight | 0.095 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.139 kg |
Number of Connectors / Ports | 2 |
Cable Length | 1000 mm |
Paired article numbers | 107469 |
Placement on Vehicle | Rear Axle Right |
Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Weight | 4.0 kg |
Extra Description | febi Plus |
Function | Compressor, compressed-air system |
Type | Compressor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Cooling Hose | from engine to engine cooler |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.363 kg |
Transmission Type | Manual Transmission |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.991 kg |
Placement on Vehicle | Rear Axle |
Length | 101.7 mm |
Width | 50.3 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.2 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 95 mm |
Thickness | 34 mm |
Type | Ring, wheel hub |
Outer diameter 1 | 136 mm |
Weight | 1.560 kg |
Function | Ring, wheel hub |
Outer diameter | 187 mm |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Weight | 0.306 kg |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (29354)
Important compatibility info
Material | PU (Polyurethane), Rubber |
Placement on Vehicle | Front Axle |
Weight | 0.201 kg |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12495)
- 2x Febi Protective Cap/Bellow, shock absorber (01367)
Important compatibility info
Brake System | ATE |
Placement on Vehicle | Rear Axle |
Weight | 0.092 kg |
Function | Accessory Kit, brake shoes |
Type | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Material | Plastic |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with cap |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 58 mm |
Weight | 0.042 kg |
Function | Mount, exhaust system |
Inner diameter | 10 mm |
Material | Rubber |
Height | 27 mm |
Width | 52 mm |
Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.10 kg |
Placement on Vehicle | Rear Axle |
Length | 112.2 mm |
Width | 73.2 mm |
Brake System | Brembo |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.6 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Replaces | 16461 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Pulley Diameter | 70 mm |
Type | Alternator |
Alternator Charge Current | 130 A |
Pulleys | with belt pulley |
Voltage | 12 V |
Number of Ribs | 7 |
Function | Alternator |
Weight | 5.94 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.302 kg |
Seal Material | NBR (nitrile butadiene rubber) |
Additional Information 2 | with oil sump gasket |
Height | 54 mm |
Width | 154 mm |
Length | 178.2 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Transmission Type | 6-Speed Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023