Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 614 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 13.472 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.77
Important compatibility info
| Weight | 2.365 kg |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Material | Steel |
| Additional Information 2 | with rubber mount |
| Inner diameter | 13 mm |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.62
Important compatibility info
| Weight | 0.390 kg |
| Width | 22 mm |
| Number of Teeth | 117 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| for OE number | 1 004 297 S3 |
| Additional Information 2 | with bolts/screws |
| Units / Pulleys | incl. tensioner pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10945)
- 1x Febi Tensioner Pulley, timing belt (29952)
- 1x Febi Pulley Bolt (40756)
£51.33
Important compatibility info
| Weight | 1.94 kg |
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1807.Q4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.38
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 230 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.294 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.312 kg |
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 19 mm |
| Eject Force | 780 N |
| Stroke | 348 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 17.8 mm |
| Housing length | 318 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.17
Important compatibility info
| Number of Ribs | 7 |
| Function | V-Ribbed Belt |
| Weight | 0.131 kg |
| Length | 1105 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Weight | 8.68 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 67.4 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.68
Important compatibility info
| Weight | 0.07 kg |
| Screw length below head | 58 mm |
| Placement on Vehicle | Front Axle |
| Length | 69 mm |
| Outer diameter | 26.5 mm |
| Spanner Size | 18 |
| Thread Length | 18 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 10.9 |
| Shaft Length | 40 mm |
| Function | Screw |
| External Thread Size | M12 x 1,5 |
| Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.26
Important compatibility info
| Weight | 1.7 kg |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 RHT |
| Internal Thread Size | M26 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 96 mm |
| Cone Size | 30 mm |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.93
Important compatibility info
| Weight | 0.11 kg |
| Length | 348 mm |
| Height | 40 mm |
| Width | 203 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.79
Important compatibility info
| External Thread Size | M12 x 1,75, M14 x 1,5 |
| Weight | 1.05 kg |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 40567 |
| Function | Tie Rod |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (12748)
- 1x Febi Inner Tie Rod (12726)
- 1x Febi Bellow, steering (22559)
- 1x Febi Bellow Kit, steering (22524)
- 1x Febi Nut (15428)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38762)
£32.96
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.081 kg |
| Cable Length | 350 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 106 mm |
| Function | Joint, propshaft |
| Weight | 0.89 kg |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19528)
- 6x Febi Screw (43412)
£87.09
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 1.0 kg |
| Paired article numbers | 176901 |
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Length | 200 mm |
| Height | 25 mm |
| Width | 200 mm |
| Filter type | Pollen Filter |
| Weight | 0.097 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.19
Important compatibility info
| Weight | 0.52 kg |
| Height | 57 mm |
| Width | 232 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Length | 309 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Weight | 0.95 kg |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting points diameter | 13.5 mm. 12.5 mm |
| Cone Size | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Timing Chain |
| Type | Timing Chain |
| Weight | 0.394 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 78 |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Weight | 0.20 kg |
| Length | 316 mm |
| Height | 59 mm |
| Width | 113 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.05
Important compatibility info
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 72 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Thickness | 40.7 mm |
| Brake Disc Thickness | 11 mm |
| Outer diameter | 280 mm |
| Weight | 4.7 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.77
Important compatibility info
| Weight | 0.718 kg |
| Material | Plastic |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| for OE number | 8E0 121 403 A |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.10
Important compatibility info
| Weight | 0.22 kg |
| Replaces | 34662 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 110 mm |
| Material | Steel |
| Spanner Size | 13 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M8 x 1,25 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.81
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake Type | Disc Brake |
| Paired article numbers | 33401 |
| Length | 237 mm. 82 mm |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Weight | 0.015 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.04
Important compatibility info
| Weight | 0.53 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 143 mm |
| Width | 40 mm |
| Thickness | 75 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.33
Important compatibility info
| Filter type | In-Line Filter |
| Number of Connectors / Ports | 2 |
| Function | Fuel filter |
| Weight | 0.159 kg |
| Type | Fuel filter |
| Length | 163 mm |
| Outer diameter | 55 mm |
| Pipe Diameter | 8 mm |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.23
Important compatibility info
| Outer diameter | 44 mm |
| Additional Information 2 | with Temperature Switch |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Opening Temperature | 105 °C |
| Weight | 0.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Weight | 0.315 kg |
| Placement on Vehicle | Right |
| Width | 43 mm |
| Material | Rubber/Metal |
| Outer diameter | 75 mm |
| Inner diameter | 11 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.50
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 185 mm |
| Width | 80 mm |
| Material | Rubber/Metal |
| Weight | 1.493 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Placement on Vehicle | Right |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 2.0 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.96
Important compatibility info
| Length | 1949 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Weight | 0.187 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.33
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.170 kg |
| Function | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
| Length | 145 mm |
| Width | 86 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Type | Steering Lock |
| Function | Steering Lock |
| Weight | 0.98 kg |
| Lock System | with two keys, with lock barrel |
| Additional Information 2 | with bolts/screws, with switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£286.60
Important compatibility info
| Rolling piston material | Steel |
| Weight | 8.0 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 179 mm |
| Thickness | 205 mm. 540 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.85
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 84 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Weight | 2.600 kg |
| Type | Timing Chain Kit |
| for OE number | 1 198 056 S1 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain Kit (46281)
- 1x Febi Tensioner, timing chain (46381)
£291.20
Important compatibility info
| Length | 1000 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 3.600 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
| Outer diameter | 83 mm |
| Thickness | 119 mm |
| Inner diameter | 29 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.49
Important compatibility info
| Placement on Vehicle | Lower |
| Function | Radiator Hose |
| Cooling Hose | from thermostat to radiator |
| Weight | 0.200 kg |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.03
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Weight | 1.42 kg |
| Number of Chain Links | 138 |
| Replaces | 47661 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£124.44
Important compatibility info
| Type | Mass Air Flow Sensor |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 3.415 kg |
| Material | Plastic |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Number of Wings | 10 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£294.48
Important compatibility info
| Weight | 0.34 kg |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.83
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 0.102 kg |
| Width | 18 mm |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.22
Important compatibility info
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 42 mm |
| Width | 40 mm |
| Material | Rubber |
| Thickness | 40 mm |
| Inner diameter | 23 mm |
| Weight | 0.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.15
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 103 mm |
| Width | 62 mm |
| Material | PU (Polyurethane) |
| Weight | 0.150 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.78
Important compatibility info
| Type | Brake Hose |
| Function | Brake Hose |
| Weight | 0.100 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 480 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.40
Important compatibility info
| Weight | 0.090 kg |
| Length | 500 mm |
| Width | 258 mm |
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 9.4 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.10
Important compatibility info
| Length | 35 mm |
| Material | Steel |
| Spanner Size | 13 |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 5.8 |
| Function | Screw Plug, oil sump |
| Screw length below head | 20 mm |
| External Thread Size | M14 x 1,5 |
| Type | Screw Plug, oil sump |
| Thread Length | 12 mm |
| Outer diameter | 28 mm |
| Additional Information 2 | with seal ring |
| Surface | Phosphatized |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.83
Important compatibility info
| Weight | 0.4 kg |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.904 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.66
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023