Important compatibility info
Material | Plastic |
Function | Cap, coolant tank |
Weight | 0.05 kg |
Opening Pressure | 2 bar |
for OE number | 17 11 7 639 022 |
Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Vacuum-controlled |
Weight | 0.481 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 1 137 860 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Colour Coding | Grey |
Additional Information | with gasket/seal, with retaining spring |
Function | Sensor, coolant temperature |
Screw length below head | 20 mm |
Weight | 0.015 kg |
Type | Sensor, coolant temperature |
Replaces | 33911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 46 mm |
Width | 40 mm |
Material | Rubber |
Thickness | 37 mm |
Inner diameter | 17 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Weight | 0.047 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.153 kg |
Function | Lock Cylinder, ignition lock |
Lock System | with two keys |
Type | Lock Cylinder, ignition lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.055 kg |
Function | Filter, cabin air |
Filter type | Pollen Filter |
Width | 195 mm |
Height | 30 mm |
Length | 227 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 176698 |
Type | Splash Guard, brake disc |
Weight | 0.226 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Type | Oxygen Sensor |
Cable Length | 1159 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Placement on Vehicle | Left |
Weight | 0.147 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Right |
Weight | 4.314 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Fill Medium | Brake Fluid |
Weight | 0.440 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.684 kg |
Placement on Vehicle | Rear, Centre |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Dipstick |
Colour | Orange |
Weight | 0.022 kg |
Function | Oil Dipstick |
Extra Description | febi Plus |
Length from grip collar to max. marking | 466 mm |
Length from grip collar to min. marking | 505 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.316 kg |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (106580)
- 2x Febi Rubber Buffer, suspension (37187)
Important compatibility info
Weight | 0.150 kg |
Placement on Vehicle | Rear Axle |
Function | Accessory Kit, brake shoes |
Type | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Radiator Hose |
Cooling Hose | from expansion tank to engine cooler |
Weight | 0.275 kg |
Type | Radiator Hose |
for OE number | 124 500 08 75 |
Placement on Vehicle | Lower Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 25.4 mm |
Number of Teeth | 137 |
Function | Timing Belt Kit |
Weight | 0.5 kg |
Type | Timing Belt Kit |
Replaces | 11061 |
Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11039)
- 1x Febi Tensioner Pulley, timing belt (10294)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07078)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 131.8 mm |
Width | 77.3 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 2.16 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Weight | 0.051 kg |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 85 A |
Belt Pulley Diameter | 48 mm |
Weight | 4.6 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 22 mm |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.566 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Material | Aluminium |
Additional Information 2 | with ball joint |
External Thread Size | M14 x 1,5 |
Steering arm type | Control Arm |
Paired article numbers | 175452 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 105 mm |
Function | Joint, propshaft |
Extra Description | ProKit |
Weight | 1.640 kg |
Type | Joint, propshaft |
Thickness | 35 mm |
Outer diameter | 141 mm |
Placement on Vehicle | Rear |
Additional Information | with nuts, with bush |
Additional Information 2 | with bolts/screws |
Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 55 mm |
Width | 60 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Thickness | 57 mm |
Inner diameter | 26.5 mm |
Weight | 0.140 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.312 kg |
Placement on Vehicle | Front Axle Right |
Length | 75 mm |
Paired article numbers | 08097 |
Function | Tie Rod End |
Internal Thread Size | M14 x 2 |
Type | Tie Rod End |
External Thread Size | M10 x 1,25 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Placement on Vehicle | Front Axle Left |
Length | 136 mm |
Paired article numbers | 26153 |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Inner diameter | 12 mm |
Function | Suspension Strut Support Mount |
Weight | 0.43 kg |
Type | Suspension Strut Support Mount |
Height | 50 mm |
Outer diameter | 117 mm. 121 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.134 kg |
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 37306 |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 19 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (02818)
- 1x Febi Ball Joint (02942)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Weight | 4.980 kg |
Material | Sheet Steel |
Paired article numbers | 36768 |
Placement on Vehicle | Lower, Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.06 kg |
Cable Length | 300 mm |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.076 kg |
Function | Hose, crankcase ventilation |
for OE number | 117 094 09 82 |
Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.430 kg |
Width | 30 mm |
Material | Plastic |
Outer diameter | 70 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 62 |
Function | Timing Chain |
Chain Type | Silent Chain, Closed chain |
Weight | 0.131 kg |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Replaces | 48283 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without coolant level sensor |
Weight | 0.52 kg |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | LR 004080 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.323 kg |
Placement on Vehicle | Rear Axle |
Length | 106 mm |
Width | 56 mm. 63 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Replaces | 16839 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.481 kg |
Function | Ignition Coil |
Ignition Coil | 2 Spark |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Pipe Diameter | 86 mm. 76 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 22 mm |
Function | Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Min. Length | 267 mm |
Max. Length | 383 mm |
Weight | 5.35 kg |
Type | Shock Absorber |
Placement on Vehicle | Rear Axle |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1287 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Weight | 0.131 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Placement on Vehicle | both sides |
Length | 516 mm |
Housing Diameter | 18 mm |
Eject Force | 160 N |
Stroke | 184 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 308.5 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 151 mm |
Inner diameter | 62 mm |
Filter type | Spin-on Filter, with water separator |
Weight | 0.390 kg |
Type | Fuel filter |
Function | Fuel filter |
Outer diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 68 mm |
Length | 140 mm |
Thickness | 110 mm |
Weight | 1.97 kg |
Thread Type | with left-hand thread |
Cone Size | 32 mm |
Function | Tie Rod End |
External Thread Size | M24 x 1,5, M30 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 1.610 kg |
Placement on Vehicle | Upper, Front Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 172770 |
Cone Size | 21.8 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle Left |
Weight | 2.639 kg |
External Teeth, Diff.Side | 29 |
Int. teeth, diff.side, conn.to transm. | 35 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 815 mm |
Colour | Blue |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 0.88 kg |
for OE number | 1806.A0 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.258 kg |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
Additional Information | with adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.246 kg |
Pulleys | with belt pulley |
Internal Thread Size | M16 x 1,5 |
Length | 125 mm |
Height | 95 mm |
Width | 128 mm |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Length | 705 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Additional Information 2 | Requires special tools for mounting |
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.590 kg |
Additional Information | with counter nut |
External Thread Size | M14 x 1,5, M22 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 322 mm |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Outer diameter | 47 mm. 41 mm |
Inner diameter | 39 mm. 34 mm |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
Weight | 0.210 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Length | 228 mm |
Inner diameter | 10 mm |
Paired article numbers | 39535 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.4 kg |
Additional Information | with lock nut |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023