Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Weight | 0.025 kg |
| Length | 39 mm |
| Outer diameter | 35 mm |
| Inner diameter | 24 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.54
Important compatibility info
| Inner diameter | 19 mm |
| Weight | 0.080 kg |
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.67
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16 x 1,5 |
| Paired article numbers | 188150 |
| External Teeth, Wheel Side | 36 |
| Weight | 5.572 kg |
| External Teeth, Diff.Side | 28 |
| Min. Length | 820 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Paired article numbers | 181199 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 60 mm |
| Material | Cast Iron |
| Weight | 4.435 kg |
| Placement on Vehicle | Front Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.48
Important compatibility info
| Placement on Vehicle | Right |
| Length | 264 mm |
| Height | 42 mm |
| Width | 217 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Paired article numbers | 194306 |
| Weight | 0.206 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Weight | 0.45 kg |
| Filter type | Activated Carbon Filter |
| Length | 323 mm |
| Height | 30 mm |
| Width | 242 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.96
Important compatibility info
| Weight | 0.09 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 370 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.81
Important compatibility info
| Weight | 0.026 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 650 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.34
Important compatibility info
| Weight | 0.123 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186679 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.97
Important compatibility info
| Weight | 0.031 kg |
| Length | 46 mm |
| Inner diameter | 2.54 mm |
| Spanner Size | 24 |
| Surface | Zinc-coated |
| Thread Length | 13 mm |
| Number of Connectors / Ports | 1 |
| Colour Coding | Blue |
| External Thread Size | M10 x 1 |
| Function | Oil Pressure Switch |
| Switch point to | 0.35 bar |
| Switch point from | 0.15 bar |
| Type | Oil Pressure Switch |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.58
Important compatibility info
| Function | Camshaft |
| Weight | 2.325 kg |
| Type | Camshaft |
| for OE number | 028 109 101 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.504 kg |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.44
Important compatibility info
| Weight | 1.068 kg |
| Outer diameter | 190 mm |
| Inner diameter | 74 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Length | 330 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.01
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Centre, Rear Axle Right |
| Weight | 0.130 kg |
| Material | Rubber/Metal, Aluminium |
| Outer diameter | 53 mm |
| Thickness | 44 mm. 54 mm |
| Inner diameter | 12 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.68
Important compatibility info
| Weight | 0.614 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 190678, 189887 |
| for OE number | 11 65 7 618 035 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.75
Important compatibility info
| Placement on Vehicle | Left, Centre |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Holder, exhaust pipe |
| Function | Holder, exhaust pipe |
| Weight | 0.242 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.63
Important compatibility info
| Number of Ribs | 7 |
| Outer diameter | 68.7 mm |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Weight | 0.738 kg |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.50
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 7.24 kg |
| Type | Air Suspension Strut |
| Function | Air Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£997.73
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.122 kg |
| Cable Length | 773 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.67
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 4.182 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.00
Important compatibility info
| Placement on Vehicle | frontal sided |
| Height | 6 mm |
| Width | 6 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 45 mm |
| Inner diameter | 32 mm |
| Rotation Direction | Clockwise rotation |
| Weight | 0.009 kg |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.74
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| Weight | 0.1 kg |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.02
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.276 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (179914)
£17.99
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.101 kg |
| Type | Accessory Kit, brake shoes |
| Function | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.04
Important compatibility info
| Outer diameter | 18 mm |
| Inner diameter | 12 mm |
| Colour | Black |
| Cooling Hose | from throttle body to distributor |
| Function | Radiator Hose |
| Weight | 0.06 kg |
| Type | Radiator Hose |
| Hose Length | 275 mm |
| Wall Thickness | 3.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.59
Important compatibility info
| Weight | 1.639 kg |
| Placement on Vehicle | Front Axle |
| Length | 137.8 mm |
| Width | 52.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Thickness/Strength 1 | 18 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.77
Important compatibility info
| Weight | 1.78 kg |
| Additional Information 2 | with anti-squeak plate |
| Placement on Vehicle | Front Axle |
| Length | 137 mm |
| Width | 56.8 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.03
Important compatibility info
| Weight | 0.311 kg |
| Function | Cable Pull, parking brake |
| Length | 1060 mm |
| Placement on Vehicle | Right Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.94
Important compatibility info
| Function | Starter |
| Type | Starter |
| Weight | 3.1 kg |
| Rated Power | 1.0 kW |
| Number of Teeth | 8 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 175399 |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Weight | 2.598 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.84
Important compatibility info
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Weight | 0.886 kg |
| Thickness | 39 mm |
| Placement on Vehicle | Front and Rear |
| Outer diameter | 152 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.16
Important compatibility info
| Length | 55 mm |
| Width | 60 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Thickness | 57 mm |
| Inner diameter | 22.5 mm |
| Placement on Vehicle | Front Axle |
| Weight | 0.145 kg |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.68
Important compatibility info
| Weight | 0.14 kg |
| Material | Rubber |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 185 mm |
| Inner diameter 1 | 30 mm. 37 mm. 42 mm. 50 mm. 55 mm |
| Inner diameter 2 | 11 mm. 22 mm. 30 mm. 42 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.70
Important compatibility info
| Mounting points diameter | 10.2 mm |
| Placement on Vehicle | Lower Front Axle |
| Function | Ball Joint |
| Cone Size | 18 mm |
| Weight | 0.450 kg |
| Additional Information | with fastening/mounting material |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.55
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.77 kg |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34310 |
| Surface | Phosphatized |
| Internal Thread Size | M15 x 1,5 |
| Extra Description | ProKit |
| Replaces | 43219 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Additional Information | with lock nut |
| Length | 345 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5, M18 x 1,5 |
| Weight | 1.31 kg |
| Function | Tie Rod |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (29323)
- 1x Febi Circlip (29322)
- 1x Febi Tie Rod End (27204)
£29.96
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.80 kg |
| Placement on Vehicle | Rear Axle |
| Width | 129 mm |
| Inner diameter | 14 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 75 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Additional Information | with lock nut |
| Type | Tie Rod End |
| Spanner Size | 24 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Paired article numbers | 183508 |
| Weight | 0.649 kg |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 0.52 kg |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | LR 024296 SK |
| Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.19
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| for OE number | 04L 906 088 B |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.47
Important compatibility info
| Width | 76.1 mm |
| Weight | 1.46 kg |
| Placement on Vehicle | Rear Axle |
| Length | 85.4 mm |
| Brake System | Brembo |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.30
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Max. Length | 380 mm |
| Min. Length | 270 mm |
| Pipe Diameter | 86 mm. 76 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 22 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 5.35 kg |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.37
Important compatibility info
| Weight | 0.04 kg |
| Function | Finger Follower, engine timing |
| Type | Finger Follower, engine timing |
| Replaces | 03564 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.30
Important compatibility info
| Weight | 0.138 kg |
| Length | 1352 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.14
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 456 mm |
| Housing Diameter | 18 mm |
| Eject Force | 185 N |
| Housing length | 251 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Stroke | 182 mm |
| Weight | 0.23 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.70
Important compatibility info
| Weight | 0.220 kg |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Height | 283 mm |
| Outer diameter | 90 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.59
Important compatibility info
| Weight | 1.9 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 136 mm |
| Width | 68 mm |
| Thickness | 110 mm |
| Thread Type | with right-hand thread |
| Cone Size | 32 mm |
| Outer Length | 160 mm |
| Function | Tie Rod End |
| External Thread Size | M30 x 1,5, M24 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.94
Important compatibility info
| Weight | 0.09 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 826 mm |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.35
Important compatibility info
| Number of Teeth | 111 |
| Surface | Coated |
| Width of castor bearing surface | 19 mm |
| Weight | 1.287 kg |
| Width | 17 mm |
| Belts | with rounded tooth profile |
| for OE number | 16 06 368 S1 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14115)
- 1x Febi Water Pump, engine cooling (24333)
£65.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023