Important compatibility info
Weight | 0.166 kg |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Thickness | 44 mm |
Material | Rubber/Metal |
Outer diameter | 36 mm |
Type | Mounting, control/trailing arm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Capacity | 0.4 l |
Function | Pressure Accumulator, pneumatic suspension |
Weight | 1.650 kg |
Type | Pressure Accumulator, pneumatic suspension |
Pressure | 50 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.175 kg |
Length | 139 mm |
Number of Connectors / Ports | 4 |
Function | Ignition Coil |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.016 kg |
Length | 88.62 mm |
Function | Sensor, washer fluid level |
Outer diameter | 15.79 mm |
Type | Sensor, washer fluid level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Duplex, with chain lock |
Number of Chain Links | 130 |
Timing Chain Size | D67HP, D67HR |
Function | Timing Chain |
Weight | 1.18 kg |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 7M3 199 555 R |
Function | Mounting, engine |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.848 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.91 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 770 mm |
Min. Length | 476 mm |
Pipe Diameter | 73 mm. 63 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear |
Outer diameter | 151 mm |
Thickness | 39 mm |
Bolt Hole Circle Diameter | 110 mm |
Function | Joint, propshaft |
Weight | 0.995 kg |
Type | Joint, propshaft |
Extra Description | Powerline |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.718 kg |
Steering arm type | Control Arm |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.030 kg |
Surface | Zinc-coated |
DIN / ISO | 71802 |
Type | Angled Ball Joint |
Function | Angled Ball Joint |
Extra Description | ProKit |
External Thread Size | M6 x 1 |
Additional Information 2 | with nut |
Length | 47.5 mm |
Internal Thread Size | M6 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.162 kg |
Filter type | Filter Insert |
Length | 198 mm |
Height | 42 mm |
Width | 171 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Material | Plastic |
Paired article numbers | 193076 |
Colour | Black |
Weight | 0.19 kg |
Type | Door Check |
Function | Door Check |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Weight | 0.203 kg |
Thread Length | 13 mm |
Eject Force | 170 N |
Function | Gas Spring, boot/cargo area |
Length | 392 mm. 234 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Roller Guide, sliding door |
Placement on Vehicle | Lower Right |
Extra Description | febi Plus |
Type | Roller Guide, sliding door |
Weight | 0.6 kg |
for OE number | 51735971 SK1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 138 mm |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Internally Vented |
Surface | Coated |
Function | Brake Disc |
Placement on Vehicle | Rear Axle |
Outer diameter | 322 mm |
Weight | 16.0 kg |
Rim Hole Number | 8 -Hole |
Minimum thickness | 27 mm |
Bolt Hole Circle Diameter | 275 mm |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.066 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 1015 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Length | 1080 mm |
Weight | 0.110 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.180 kg |
Placement on Vehicle | Rear Axle Left, Centre, Rear Axle Right |
Function | Mounting, control/trailing arm |
Thickness | 64 mm |
Material | Rubber/Metal |
Type | Mounting, control/trailing arm |
Outer diameter | 60 mm |
Inner diameter | 12.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hole Spacing | 115 mm |
Weight | 10.8 kg |
Placement on Vehicle | Rear Axle |
Length | 666 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 48 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 45 mm |
Outer diameter | 50 mm |
Weight | 0.190 kg |
Function | Stop- /Mounting Buffer |
Thread Length | 30 mm |
External Thread Size | M10 x 1,5 |
Type | Stop- /Mounting Buffer |
Buffer Design | A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.171 kg |
Opening Temperature | 70 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (18798)
- 1x Febi Seal, thermostat (10390)
Important compatibility info
Function | Cable Pull, parking brake |
Paired article numbers | 106230 |
Placement on Vehicle | Left Rear |
Length | 2004 mm |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Pressure Converter, exhaust control |
Operating Mode | Electric-pneumatic |
Voltage | 12 V |
Extra Description | febi Plus |
Type | Pressure Converter, exhaust control |
Number of Connectors / Ports | 2 |
Weight | 0.21 kg |
for OE number | 1H0 906 627 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.53 kg |
Additional Information 2 | with thermostat |
Material | Aluminium |
Number of Teeth | 28 |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
for OE number | 04E 121 600 CS |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Length | 180 mm |
External Thread Size | M10 x 1 |
Placement on Vehicle | Rear Axle Right, inner |
Paired article numbers | 185682 |
Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 50 mm |
Shock Absorber Type | Oil Pressure |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 720 mm |
Min. Length | 435 mm |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 3.2 kg |
Mounting points diameter | 20 mm |
Piston conrod diameter | 16 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Weight | 2.040 kg |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | both sides, Front |
Weight | 2.490 kg |
Type | Mounting, engine |
Internal Thread Size | M12 x 1,5, M12 x 1,75, M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 895 mm |
Weight | 6.57 kg |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Wheel Side | 25 |
Thread Size | M18x1,5 |
Paired article numbers | 193513 |
External Teeth, Diff.Side | 22 |
Additional Information | with axle nut |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Placement on Vehicle | both sides |
Length | 589 mm |
Weight | 0.2 kg |
Housing Diameter | 18 mm |
Eject Force | 415 N |
Stroke | 230 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 333 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Minimum thickness | 9.2 mm |
Bolt Hole Circle Diameter | 98 mm |
Centering Diameter | 59 mm |
Surface | Coated |
Function | Brake Disc |
Rotor Style | Perforated, Solid |
Thickness | 39.8 mm |
Brake Disc Thickness | 11 mm |
Outer diameter | 240 mm |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Weight | 3.46 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Combi Switch Function | with indicator function, with high beam function, with headlight flasher |
Function | Steering Column Switch |
Weight | 0.076 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.237 kg |
Placement on Vehicle | Front Axle |
Length | 51 mm |
Material | Rubber/Metal |
Outer diameter | 64 mm |
Inner diameter | 44 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Function | Interior Blower |
Type | Interior Blower |
Weight | 1.39 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Right |
Length | 130 mm |
Height | 125 mm |
Type | Mounting, engine |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.940 kg |
Width | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178200 |
Weight | 3.045 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 1720 mm |
Weight | 0.509 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.420 kg |
Placement on Vehicle | Front Axle Left |
Length | 332 mm |
Paired article numbers | 28289 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.58 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30605 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston Diameter | 19.1 mm |
Weight | 0.195 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Grey Cast Iron |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M18x1,5 |
External Teeth, Wheel Side | 27 |
Weight | 9.143 kg |
External Teeth, Diff.Side | 39 |
Min. Length | 986 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Transmission-side joint diameter | 87 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 215 mm |
Height | 57 mm |
Width | 201 mm |
Filter type | Activated Carbon Filter |
Weight | 0.30 kg |
Type | Filter, cabin air |
Function | Filter, cabin air |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 22 mm |
Material | Steel |
Outer diameter | 33 mm |
Additional Information 2 | with seal ring |
Spanner Size | 17 |
Transmission Type | 6-Speed Automatic Transmission |
Surface | Zink-nickel coated |
Thread Length | 14 mm |
Weight | 0.066 kg |
Bolt Head/Nut Design | Hexagon Socket |
Type | Screw Plug, transmission housing |
Function | Screw Plug, transmission housing |
Screw length below head | 14 mm |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw Plug, transmission housing (172147)
- 1x Febi Gasket, automatic transmission oil sump (172220)
Important compatibility info
Rotor Style | Solid |
Weight | 4.27 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 279 mm |
Thickness | 69.5 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8.3 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Diameter 1 | 54 mm |
Opening Temperature | 83 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Weight | 0.307 kg |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Placement on Vehicle | Upper |
Engine Management | Timing Chain |
Function | Guide, timing chain |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.00 kg |
Placement on Vehicle | Rear Axle |
Width | 25 mm |
Outer diameter | 160 mm |
Function | Brake Shoe Set, parking brake |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.010 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Left |
Bearing/Mounting Type | electrically adjustable hydro mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.636 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 340 mm |
Material | Sheet Steel |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023