Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.101 kg |
| Length | 89 mm |
| Height | 55 mm |
| Width | 89 mm |
| Filter type | Filter Insert, Pre-Filter, with water separator |
| Chemical Properties | Rape Seed oil resistant |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.52
Important compatibility info
| Weight | 0.325 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 9 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 2125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.54
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.68
Important compatibility info
| Weight | 11.956 kg |
| Number of mounting bores | 2 |
| External Teeth, Diff.Side | 29 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24.1,5 |
| Bolt Hole Circle Diameter | 131.3 mm |
| Bore Diameter | 11.3 mm |
| External Teeth, Wheel Side | 29 |
| Paired article numbers | 183462 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 90 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Function | Drive Shaft |
| Min. Length | 982 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.79
Important compatibility info
| Weight | 0.470 kg |
| Length | 429 mm |
| Height | 36 mm |
| Width | 157 mm |
| Filter type | Filter Insert, Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.13
Important compatibility info
| Function | Rubber Buffer, suspension |
| Weight | 0.061 kg |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Width | 57 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 97 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.04
Important compatibility info
| Weight | 0.13 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 1343.KX SK |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.25
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.060 kg |
| Cable Length | 460 mm |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.70
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| Weight | 1.328 kg |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.77
Important compatibility info
| Inner diameter | 30 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with bolts/screws |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Weight | 3.434 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter | 83 mm |
| Width | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.83
Important compatibility info
| Function | Oil Cooler, engine oil |
| Material | Aluminium |
| Weight | 0.5 kg |
| Type | Oil Cooler, engine oil |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.01
Important compatibility info
| Function | Dosing Module, urea injection |
| Weight | 0.28 kg |
| Type | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 15.625 kg |
| Length | 1025 mm |
| Outer diameter | 60 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 28.8 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| for OE number | 470 130 38 15 |
| Weight | 17.355 kg |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£1,053.81
Important compatibility info
| Weight | 2.3 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 500 mm |
| Min. Length | 350 mm |
| Pipe Diameter | 51 mm. 45 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.54
Important compatibility info
| Weight | 0.025 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Current Strength | 30 A |
| Function | Relay, main current |
| Relay Number | 15, 17, 24, 53, 77, 204, 208, 214, 370, 373, 643, 644, 645 |
| Type | Relay, main current |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.82
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Weight | 0.650 kg |
| Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.09
Important compatibility info
| Weight | 3.2 kg |
| Outer diameter | 60 mm |
| Bolt Hole Circle Diameter | 106.5 mm |
| Number of Holes | 5 |
| Outer diameter 1 | 65 mm |
| Width | 78 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Additional Information 2 | with RPM sensor |
| Outer diameter 2 | 140 mm |
| Function | Wheel Bearing Kit |
| Replaces | 19654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.99
Important compatibility info
| Weight | 4.976 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14522 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Type | Cable Pull, manual transmission |
| Weight | 1.116 kg |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1020 mm |
| Inner length 2 | 942 mm |
| Outer length 1 | 1227 mm |
| Outer length 2 | 1217 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023