Important compatibility info
Weight | 0.810 kg |
Length | 240 mm |
Paired article numbers | 28581 |
Placement on Vehicle | Front Axle Left |
Function | Tie Rod End |
Type | Tie Rod End |
Additional Information | with counter nut |
Cone Size | 17 mm |
External Thread Size | M12 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Outer diameter | 27 mm |
Opening Temperature | 83 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 655 mm |
Weight | 5.206 kg |
Multi-piece | one-piece |
Type | Propshaft, axle drive |
Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.259 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Cone Size | 17 mm |
Type | Ball Joint |
Function | Ball Joint |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 172.47 mm |
Width | 72.5 mm. 69.2 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 2.124 kg |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Weight | 0.736 kg |
Placement on Vehicle | Lower, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose, crankcase ventilation |
Height | 45 mm |
Width | 110 mm |
for OE number | 11 15 7 533 341 |
Inner diameter 2 | 13 mm |
Inner diameter 1 | 16 mm |
Weight | 0.041 kg |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Additional Information 2 | with quick couplers |
Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Function | Brake Disc |
Brake Disc Thickness | 33 mm |
Weight | 9.8 kg |
Surface | Coated |
Centering Diameter | 93 mm |
Bolt Hole Circle Diameter | 116 mm |
Minimum thickness | 30 mm |
Type | Brake Disc Rotor |
Thickness | 55 mm |
Outer diameter | 288 mm |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Placement on Vehicle | Front Axle |
Length | 180.1 mm |
Width | 77.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.152 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Front Axle Right |
Type | Sensor, wheel speed |
Cable Length | 1070 mm |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.83 kg |
Placement on Vehicle | Rear, Lower |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Function | Sealing Cap, oil filler neck |
Colour | Yellow |
Additional Information | with gasket/seal |
Type | Sealing Cap, oil filler neck |
for OE number | 56 50 831 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.26 kg |
Outer diameter | 350 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Rated Power | 250 W |
Number of Wings | 7 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | VL120L |
Function | Clutch, radiator fan |
Weight | 0.946 kg |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.22 kg |
Placement on Vehicle | Front Axle Left |
Length | 70 mm |
Material | Steel |
Spanner Size | 17 |
Paired article numbers | 42101 |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
External Thread Size | M12 x 1,25 |
Weight | 3.0 kg |
Function | Mounting, engine |
Placement on Vehicle | Left |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | before exhaust turbocharger |
Spanner Size | 17 |
Cable Length | 174 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right, Rear, inner, outer |
Function | Bushing, leaf spring |
Length | 34 mm |
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 42 mm |
Inner diameter | 19.9 mm |
Weight | 0.025 kg |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 12 |
Rated Power | 2 kW |
Weight | 4.3 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 177 mm |
Surface | Coated |
Function | Brake Disc |
Brake Disc Type | Internally Vented |
Minimum thickness | 28 mm |
Weight | 15.83 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 335 mm |
Thickness | 111 mm |
Brake Disc Thickness | 34 mm |
Rim Hole Number | 8 -Hole |
Internal Thread Size | M12 x 1,5 |
Type | Brake Disc |
for OE number | 970 423 12 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Opening Temperature | 79 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 12.65 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 349 mm |
Thickness | 56.9 mm |
Brake Disc Thickness | 34 mm |
Minimum thickness | 32 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 109 mm |
Inner diameter | 81 mm |
Function | Mounting, stabiliser bar |
Weight | 0.894 kg |
Placement on Vehicle | Rear Axle |
Length | 67 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
DIN / ISO | 7638-1 EBS |
Number of Connectors / Ports | 7 |
Inspection Tag | ADR |
Additional Information 2 | with screw connection |
Voltage | 24 V |
Protection Type (IP Code) | 54 |
Version | OE Standard |
Type | Towbar Socket |
Weight | 0.257 kg |
Function | Towbar Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Inner diameter | 46 mm |
Height | 204 mm |
Weight | 0.259 kg |
Filter type | Filter Insert |
Outer diameter | 107 mm |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.229 kg |
Placement on Vehicle | Upper |
Inner diameter | 31 mm |
Cooling Hose | from radiator to water pipe |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Weight | 2.45 kg |
Operating Mode | Manual |
Function | Tilt Pump, driver cab |
Number of Connectors / Ports | 2 |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Length | 1688 mm |
Type | V-Ribbed Belt |
Weight | 0.287 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.280 kg |
Height | 415 mm |
Outer diameter | 230 mm |
Inner diameter | 138 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.078 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, switch module |
Additional Information 2 | with seal ring |
Type | Sensor, switch module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.345 kg |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.210 kg |
Height | 174 mm |
Material | Paper |
Outer diameter | 95 mm. 66 mm |
Inner diameter | 46 mm. 13 mm |
Filter type | Filter Insert |
Colour | White |
Type | Fuel filter |
Function | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Outer diameter | 420 mm |
Operating Mode | Electric |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Tensile Cord Material | Aramid |
Length | 1090 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Weight | 0.126 kg |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Outer diameter | 48 mm |
Thickness | 10 mm |
Inner diameter | 35 mm |
Weight | 0.010 kg |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.37 kg |
Placement on Vehicle | Left, Lower, Front, Front Axle |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 106560 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Pressure Limiting Valve |
Inlet pressure from | 13 bar |
Outlet pressure from | 10 bar |
Function | Pressure Limiting Valve |
Internal Thread Size | M22 x 1,5 |
Weight | 0.37 kg |
Operating Pressure | 20 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with pre-filter |
Weight | 0.615 kg |
Additional Information | with gaskets/seals |
Type | Pump, fuel pre-supply |
Function | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 970 mm |
Placement on Vehicle | Front Axle Left |
Number of Connectors / Ports | 2 |
Weight | 0.161 kg |
Type | Sensor, wheel speed |
Paired article numbers | 174828 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 219 mm |
Additional Information | with counter nut |
Outer diameter | 36 mm |
Spanner Size | 36 |
Weight | 0.470 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals, with oil cooler, with oil filter |
Additional Information 2 | with sensor |
Weight | 1.5 kg |
Type | Housing, oil filter |
Function | Housing, oil filter |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.067 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 987 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 17006 |
Weight | 0.355 kg |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Replaces | 18494; 19348 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 1740 mm |
Placement on Vehicle | Front Axle Left |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Weight | 0.175 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.06 kg |
Opening Temperature | 105 °C |
Outer diameter | 33 mm |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 92.1 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Weight | 0.920 kg |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle |
Additional Information 2 | with fastening material |
Width | 46.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.395 kg |
Brake Caliper Type | Brake Caliper (1 piston) |
Type | Brake Caliper |
Paired article numbers | 178744 |
Function | Brake Caliper |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Right |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | Left Rear |
Stroke | 177 mm |
Eject Force | 145 N |
Housing Diameter | 18 mm |
Housing length | 289 mm |
Weight | 0.2 kg |
Length | 513 mm |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.003 kg |
Timing Chain Size | Z53H |
Chain Type | Silent Chain, with chain lock |
Function | Link, timing chain |
Type | Link, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.906 kg |
Material | Aluminium |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023