Important compatibility info
Height | 83.5 mm |
Outer diameter | 107 mm |
Additional Information 2 | with seal ring |
Spanner Size | 36 |
Weight | 0.180 kg |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.294 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 22418 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22415)
- 2x Febi Nut (22263)
Important compatibility info
Weight | 0.14 kg |
Placement on Vehicle | both sides |
Length | 294 mm |
Housing Diameter | 18 mm |
Eject Force | 410 N |
Stroke | 88 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 175.5 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.507 kg |
Thread Length | 24 mm |
Screw length below head | 38 mm |
Rod/Strut | Coupling Rod |
Spanner Size | 18 |
Additional Information 2 | with nut |
Material | Steel |
Diameter | 1 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 160 mm |
Outer diameter | 109 mm |
Filter type | Spin-on Filter, with water separator |
Function | Fuel filter |
Weight | 0.762 kg |
Internal Thread Size | 1 1/4" - UNS - 2B |
External Thread Size | M95 x 2,5 |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Length | 96 mm |
Height | 143 mm |
Filter type | Spin-on Filter |
Weight | 0.520 kg |
Internal Thread Size | 1" - 14 UNS |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 23 mm |
Function | Link/Coupling Rod, stabiliser bar |
Paired article numbers | 48124 |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Rear Axle Right |
Length | 150 mm |
Material | Steel |
Outer diameter | 8 mm |
Spanner Size | 14 |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.276 kg |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.655 kg |
Function | Inner Tie Rod |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left |
Length | 310 mm |
Paired article numbers | 34812 |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Length | 453 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 62 mm |
Material | Steel |
Paired article numbers | 26737 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 10 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Weight | 0.36 kg |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Additional Information | with nuts |
External Thread Size | M10 x 1,5, M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 200 mm |
Outer diameter | 8 mm |
Paired article numbers | 26533 |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Front Axle Right |
Length | 200 mm |
Paired article numbers | 26534 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Outer diameter | 8 mm |
External Thread Size | M10 x 1,5, M12 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.215 kg |
Opening Temperature | 79 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (09856)
- 1x Febi Seal, thermostat (10390)
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 1710 mm |
Function | Cable Pull, parking brake |
Weight | 0.61 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 390 mm |
Function | Brake Hose |
Weight | 0.15 kg |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 178 mm |
Additional Information | with lock nut |
Spanner Size | 17 |
Paired article numbers | 196393 |
Weight | 0.703 kg |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.295 kg |
Material | Rubber/Metal |
Inner diameter | 55 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 950 mm |
Number of Connectors / Ports | 2 |
Function | Warning Contact, brake pad wear |
Weight | 0.04 kg |
Brake Type | Disc Brake |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, wheel bearing housing |
Type | Mounting, wheel bearing housing |
Weight | 0.256 kg |
Inner diameter | 14 mm |
Outer diameter | 44 mm |
Length | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 72 mm |
Inner diameter | 17 mm |
Colour | Grey |
Weight | 0.340 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023