Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 107.5 mm |
| Width | 42.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 0.86 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.20
Important compatibility info
| Weight | 0.74 kg |
| Placement on Vehicle | Rear Axle |
| Length | 101.4 mm |
| Width | 44.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.20
Important compatibility info
| Weight | 0.043 kg |
| Type | Sensor, driver cab locking |
| Function | Sensor, driver cab locking |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.20
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 53 mm. 32 mm |
| Thickness | 80 mm |
| Inner diameter | 15 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.247 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.20
Important compatibility info
| Weight | 0.6 kg |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 122 mm |
| Paired article numbers | 37263 |
| Thread Length | 20.5 mm. 60 mm |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.21
Important compatibility info
| Weight | 0.036 kg |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Function | Oil Hose |
| Extra Description | febi Plus |
| Length | 343 mm |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Weight | 0.21 kg |
| Type | Oil Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Length | 1120 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Weight | 0.102 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.700 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Length | 72.5 mm. 90 mm |
| Outer diameter | 70 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.078 kg |
| Number of Ribs | 5 |
| Length | 628 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
| Weight | 0.582 kg |
| Type | Mounting, engine |
| for OE number | 1K0 199 855 BD |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.078 kg |
| Function | Finger Follower, engine timing |
| Type | Finger Follower, engine timing |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 30 |
| Outer diameter 1 | 84 mm |
| Outer diameter 2 | 52 mm |
| Function | Joint Kit, drive shaft |
| Weight | 2.06 kg |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.320 kg |
| Height | 424 mm |
| Outer diameter | 183 mm |
| Inner diameter | 141 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.250 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (27122)
- 2x Febi Protective Cap/Bellow, shock absorber (26941)
£19.23
Important compatibility info
| Weight | 0.186 kg |
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Pipe Diameter | 10 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 29.3 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Length | 270 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.46 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Replaces | 43451 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Weight | 0.836 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Weight | 0.809 kg |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Cone Size | 21 mm |
| Mounting points diameter | 10.2 mm |
| Weight | 0.660 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023