Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.088 kg |
| Height | 80 mm |
| Outer diameter | 74.4 mm |
| Spanner Size | 27 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Outer diameter | 140 mm |
| Inner diameter | 89 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Weight | 0.382 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 34 mm |
| Material | Plastic |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Weight | 0.170 kg |
| Inner diameter 2 | 61 mm |
| Inner diameter 1 | 22 mm |
| Material | Thermoplast |
| Length | 103 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175234)
- 1x Febi Molybdenum Grease (02582)
£19.80
Important compatibility info
| Weight | 0.95 kg |
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 267 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 292 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M15 x 1,5, M14 x 1,5 |
| Weight | 0.718 kg |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Weight | 0.046 kg |
| Length | 745 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Material | ACM (Polyacrylate) |
| Weight | 0.055 kg |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.81
Important compatibility info
| Timing Chain Size | G68VCO, G68V-1 |
| Number of Chain Links | 70 |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.306 kg |
| Function | Chain, intermediate shaft |
| Type | Chain, intermediate shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.81
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 0.797 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.82
Important compatibility info
| Number of Ribs | 5 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Weight | 0.058 kg |
| Type | V-Ribbed Belt |
| Length | 748 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.82
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.252 kg |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (34288)
- 2x Febi Rubber Buffer, suspension (21113)
£19.82
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.05 kg |
| Type | Mounting, engine |
| for OE number | 1844.47 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.82
Important compatibility info
| Weight | 0.320 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.82
Important compatibility info
| Placement on Vehicle | Lower, Front, Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Weight | 0.626 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.83
Important compatibility info
| Thickness | 255 mm |
| Spanner Size | 16 |
| Paired article numbers | 183942 |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Thread Length | 29 mm |
| Weight | 0.415 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 210 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Steel |
| External Thread Size | M10 x 1,5 |
| Diameter | 1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.83
Important compatibility info
| Weight | 0.060 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 765 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.83
Important compatibility info
| Weight | 0.32 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Length | 108 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30084)
- 1x Febi Clamping Clip (45645)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (27214)
- 1x Febi Molybdenum Grease (02582)
£19.83
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 159 mm |
| Additional Information | with lock nut |
| Spanner Size | 18 |
| Paired article numbers | 196319 |
| Weight | 0.781 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.83
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Combi Switch Function | with indicator function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
| Weight | 0.14 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.83
Important compatibility info
| Weight | 0.282 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber, Rubber with fabric lining |
| Inner diameter | 18 mm |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (14942)
- 2x Febi Mounting, stabiliser bar (17680)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
£19.83
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023