Important compatibility info
Weight | 0.789 kg |
External Thread Size | M14 x 1,5 |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information 2 | with crown nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 17.5 mm |
Function | Brake Pad Set, disc brake |
Width | 58.5 mm. 60.9 mm |
Inspection Tag | ECE R90 Approved |
Additional Information 2 | with fastening material |
Length | 136.8 mm |
Wear Warning Contact | prepared for wear warning indicator |
Placement on Vehicle | Rear Axle |
Weight | 1.760 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Number of Ribs | 6 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Alternator type | for starter generator |
Weight | 0.130 kg |
Length | 1441 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5, M18 x 1,5 |
Weight | 0.852 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 313 mm |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (34384)
- 1x Febi Bellow Kit, steering (34293)
Important compatibility info
Material | PTFE (polytetrafluoroethylene) |
Width | 7.4 mm |
Placement on Vehicle | frontal sided |
Inner diameter | 40 mm |
Weight | 0.022 kg |
Type | Shaft Seal, crankshaft |
Function | Shaft Seal, crankshaft |
Outer diameter | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 96 mm |
Outer diameter | 50 mm |
Inner diameter | 20 mm |
Function | Mount, leaf spring hanger |
Weight | 0.672 kg |
Type | Mount, leaf spring hanger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.025 kg |
Length | 155.2 mm |
Width | 66 mm. 71.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 18 mm |
Housing length | 175.5 mm |
Weight | 0.21 kg |
Placement on Vehicle | both sides |
Length | 299 mm |
Housing Diameter | 19 mm |
Eject Force | 680 N |
Stroke | 89 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.620 kg |
Placement on Vehicle | Front Axle |
Length | 133 mm |
Width | 58 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.043 kg |
Placement on Vehicle | Rear Axle |
Length | 118.7 mm |
Width | 47 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.601 kg |
Placement on Vehicle | Left Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.898 kg |
Placement on Vehicle | Rear Axle |
Length | 122.2 mm |
Width | 48.2 mm. 51.7 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.1 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, both sides |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.68 kg |
Type | Mounting, engine |
for OE number | 11270-95F0A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Paired article numbers | 40537 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Ball Joint |
Weight | 0.7 kg |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40276)
- 1x Febi Securing Plate, ball joint (40284)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
Function | Coolant Pipe |
Weight | 0.157 kg |
Cooling Hose | from expansion tank to distributor |
Extra Description | febi Plus |
Type | Coolant Pipe |
Additional Information 2 | with seal ring, with clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Coolant Pipe (103662)
- 1x Febi Clip (103137)
Important compatibility info
Height | 506 mm |
Outer diameter | 156 mm |
Inner diameter | 134 mm |
Function | Air Filter |
Filter type | Filter Insert |
Weight | 0.670 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.390 kg |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 1.599 kg |
Thickness/Strength 1 | 18.2 mm |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Additional Information 2 | with fastening material |
Width | 58.3 mm |
Length | 128.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, manual transmission |
Function | Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.900 kg |
Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 4 mm |
Placement on Vehicle | Rear Axle |
Inspection Tag | ECE R90 Approved |
Outer diameter | 180 mm |
Width | 25 mm |
Function | Brake Shoe Set, parking brake |
Weight | 1.20 kg |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023