Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 110.4 mm |
| Width | 37.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Thickness | 128 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.560 kg |
| Outer diameter | 54 mm. 50 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower Front Axle, Centre |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Weight | 0.030 kg |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 70 mm |
| Thickness | 8 mm |
| Inner diameter | 55 mm |
| Function | Shaft Seal, injector pump |
| Type | Shaft Seal, injector pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.31 kg |
| Height | 109 mm |
| Outer diameter | 97 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right, Upper |
| for OE number | 1806.74 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.850 kg |
| Type | Mounting, engine |
| Paired article numbers | 185108 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.092 kg |
| Length | 57 mm |
| Spanner Size | 19 |
| Opening Pressure | 14.3 bar |
| Function | Pressure Relief Valve |
| External Thread Size | M16 x 1,5 |
| Type | Pressure Relief Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 693 mm |
| Paired article numbers | 180235 |
| Weight | 0.170 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Additional Information | with holder |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1212 mm |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.112 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.361 kg |
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Stroke | 250 mm |
| Eject Force | 330 N |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 323.5 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.437 kg |
| Diameter | 400 mm. 430 mm |
| Type | Repair Kit, clutch release bearing |
| Function | Repair Kit, clutch release bearing |
| Replaces | 44160 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Length | 1635 mm |
| Weight | 0.227 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.470 kg |
| Placement on Vehicle | Front |
| Length | 157 mm |
| Width | 88 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.050 kg |
| Voltage | 28.5 V |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 700 mm |
| Housing Diameter | 22 mm |
| Mounting points diameter | 18 mm |
| Eject Force | 660 N |
| Stroke | 305 mm |
| Housing length | 373.5 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.556 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 1.016 kg |
| Function | Bolt, release fork |
| Type | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
£21.62
Important compatibility info
| Function | Cable Pull, clutch control |
| Outer Length | 971 mm |
| Inner Length | 602 mm |
| Weight | 0.262 kg |
| Type | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Additional Information | with lock nut |
| Weight | 0.92 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 211 mm |
| Paired article numbers | 43547 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| for OE number | 1 755 951 S1 |
| Weight | 0.7 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 65 mm |
| Inner diameter | 55 mm |
| Function | Radiator Hose |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Type | Radiator Hose |
| Hose Length | 574 mm |
| Wall Thickness | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101070)
- 2x Febi Hose Clamp (48355)
£21.62
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 20.3 mm |
| Weight | 0.490 kg |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 1.165 kg |
| Internal Thread Size | M32 x 1,5 |
| Height | 263 mm |
| Outer diameter | 107 mm |
| Inner diameter | 93 mm |
| Filter type | Spin-on Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023