Important compatibility info
Tightening Torque | 25 Nm |
Extra Description | febi Plus |
Function | Cap, oil filter housing |
Type | Cap, oil filter housing |
Weight | 0.096 kg |
Bolt Head/Nut Design | Male Hex |
Additional Information 2 | with seal ring |
Spanner Size | 24 |
Outer diameter | 65 mm |
Height | 90.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.205 kg |
Material | FPM (fluoride rubber) |
Outer diameter | 175 mm |
Inner diameter | 145 mm |
Function | Shaft Seal, wheel hub |
Width | 16 mm |
Type | Shaft Seal, wheel hub |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.45 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Roller Guide, sliding door |
Placement on Vehicle | Right, Centre |
Extra Description | febi Plus |
Weight | 0.4 kg |
Function | Roller Guide, sliding door |
Paired article numbers | 194399 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 77 mm |
Type | Bellow Kit, drive shaft |
Weight | 0.170 kg |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Material | Thermoplast |
Length | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172894)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 1.8 kg |
Placement on Vehicle | Front Axle |
Length | 89.7 mm |
Width | 73.8 mm |
Wear Warning Contact | excl. wear warning contact |
Thickness/Strength 1 | 18.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 65.4 mm |
Thickness/Strength 1 | 13.4 mm |
Length | 76.6 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 0.916 kg |
Inspection Tag | ECE R90 Approved |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 0.796 kg |
Paired article numbers | 176403 |
Steering arm type | Control Arm |
Inner diameter | 12 mm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Right, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.87 kg |
Placement on Vehicle | Front Axle |
Length | 138 mm |
Width | 59.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 360 mm |
Type | Inner Tie Rod |
Weight | 0.61 kg |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Function | Inner Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with anti-squeak plate |
Placement on Vehicle | Rear Axle |
Length | 110.7 mm |
Width | 45.7 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.13 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.665 kg |
Material | Plastic |
Connector Shape | Round |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information | with coolant level sensor |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Material | Plastic |
for OE number | 96 781 258 80 SK |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.302 kg |
Placement on Vehicle | both sides |
Length | 495 mm |
Housing Diameter | 19 mm |
Eject Force | 570 N |
Stroke | 175 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 298 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Type | Dust Cover Kit, shock absorber |
Weight | 0.368 kg |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (30423)
- 2x Febi Protective Cap/Bellow, shock absorber (182957)
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Weight | 0.236 kg |
Type | Splash Guard, brake disc |
Paired article numbers | 174922 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | Elastic |
Function | V-Ribbed Belt Set |
Length 1 | 690 mm |
Additional Information 2 | Requires special tools for mounting |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of ribs 1 | 5 |
Number of ribs 2 | 6 |
Type | V-Ribbed Belt Set |
Weight | 0.163 kg |
Length 2 | 1019 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38245)
- 1x Febi V-Ribbed Belt (38241)
Important compatibility info
Placement on Vehicle | both sides |
Length | 551 mm |
Paired article numbers | 14661 |
Housing Diameter | 22 mm |
Eject Force | 850 N |
Stroke | 202 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 291.5 mm |
Type | Gas Spring, boot/cargo area |
Weight | 0.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Lower, Front Axle Left, Front Axle Right, Centre |
Material | Rubber/Metal |
Outer diameter | 45.4 mm |
Thickness | 48 mm |
Inner diameter | 14.2 mm |
Weight | 0.170 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 200 mm |
Spanner Size | 17 |
Rod/Strut | Coupling Rod |
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.31 kg |
Extra Description | ProKit |
External Thread Size | M10 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Thread Length | 19.7 mm |
Pipe Diameter | 8 mm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023