Important compatibility info
Weight | 0.6 kg |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Material | Plastic |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 8D0 121 403 L |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.095 kg |
External Thread Size | M14 x 2 |
Function | Ball Joint |
Placement on Vehicle | Rear Axle, Rear Axle Upper |
Type | Ball Joint |
Additional Information | with lock nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.111 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 172048 |
Number of Connectors / Ports | 2 |
Resistance | 1800 Ohm |
Cable Length | 1320 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 110 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.068 kg |
Placement on Vehicle | transmission sided |
Material | ACM (Polyacrylate) |
Outer diameter | 130 mm |
Thickness | 13 mm |
Type | Shaft Seal, crankshaft |
Replaces | 11482 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Lower, Front |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.71 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.615 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 19810 |
Cone Size | 19 mm |
Function | Ball Joint |
Mounting points diameter | 18 mm |
External Thread Size | M8 x 1,25 |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Function | Oil Cooler, engine oil |
Additional Information | with gasket/seal |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.080 kg |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 1180 mm |
Number of Connectors / Ports | 2 |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left, Rear |
Weight | 0.450 kg |
for OE number | 31277444 |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Paired article numbers | 18758 |
Placement on Vehicle | Front Axle Right |
Weight | 1.16 kg |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Replaces | 37881 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (18699)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
Placement on Vehicle | both sides |
Length | 582 mm |
Housing Diameter | 19 mm |
Eject Force | 460 N |
Stroke | 203 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 333.5 mm |
Weight | 0.386 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Number of Connectors / Ports | 2 |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Type | Resistor, interior blower |
for OE number | 51926262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.215 kg |
Placement on Vehicle | Front Axle Left |
Length | 383 mm. 420 mm |
Spanner Size | 38 |
Paired article numbers | 34304 |
Thread Length | 56 mm |
Function | Tie Rod |
External Thread Size | M14 x 1,5, M12 x 1,5 |
Type | Tie Rod |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (34299)
- 1x Febi Tie Rod End (30818)
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 11138 |
Weight | 0.474 kg |
Placement on Vehicle | Front Axle Left, Upper, Front |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (10019)
Important compatibility info
Weight | 0.02 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Length | 50.9 mm |
Type | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Outer diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.052 kg |
Paired article numbers | 176666 |
Placement on Vehicle | Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 495 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.266 kg |
Length | 571 mm |
Housing Diameter | 18 mm |
Eject Force | 215 N |
Stroke | 231 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 310.5 mm |
Replaces | 27788 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Outer diameter | 47 mm |
Inner diameter | 25 mm |
Function | Deflection Pulley/Guide Pulley, timing belt |
Material | Metal |
Width | 12 mm |
Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Placement on Vehicle | Left Rear |
Length | 416 mm |
Housing Diameter | 18 mm |
Eject Force | 260 N |
Stroke | 160 mm |
Mounting points diameter | 8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 220.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.097 kg |
Placement on Vehicle | Lower Left |
Cooling Hose | from heat exchanger to engine |
Function | Radiator Hose |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 185 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023