Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.265 kg |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Length | 4400 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 4280 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left, Wheel Side |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 38 |
| Internal Teeth, wheel side | 33 |
| Weight | 2.156 kg |
| Number of Teeth, ABS ring | 45 |
| ABS Ring Diameter | 81 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Weight | 1.67 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Outer diameter | 80 mm |
| External Teeth, Wheel Side | 22 |
| Seal Diameter | 69 mm |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.550 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 71738468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Inner Brake Drum Diameter | 180 mm |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 30 mm |
| Outer diameter | 211.5 mm |
| Thickness | 74.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 690 mm |
| Housing Diameter | 19 mm |
| Eject Force | 630 N |
| Stroke | 174 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 372 mm |
| Mounting points diameter | 16.5 mm |
| Weight | 0.480 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Wire Diameter | 11.5 mm |
| Number of Coils | 5.2 |
| Weight | 1.8 kg |
| Outer diameter | 143 mm |
| Length | 334 mm |
| Placement on Vehicle | Front Axle |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.896 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with screw, with nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21840)
- 1x Febi Inner Tie Rod (31496)
- 1x Febi Nut (39908)
£27.56
Important compatibility info
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Weight | 0.087 kg |
| for OE number | 3985651 |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 160 mm |
| Thickness | 19.5 mm |
| Inner diameter | 120 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
| Weight | 0.372 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Mounting points diameter | 16.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 6 mm |
| Eject Force | 235 N |
| Stroke | 47 mm |
| Weight | 0.2 kg |
| Length | 165 mm |
| Housing Diameter | 15 mm |
| Placement on Vehicle | both sides |
| Housing length | 98.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 52.2 mm |
| Thickness | 40 mm |
| Additional Information 2 | with bolts/screws |
| Inner diameter | 24.5 mm |
| Weight | 0.210 kg |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Additional Information | with nuts |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (103787)
- 2x Febi Bolt, control arm (174648)
- 1x Febi Nut (10638)
- 1x Febi Screw (40708)
- 1x Febi Nut (15428)
£27.56
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Steering | with tie rod end |
| Weight | 1.206 kg |
| Paired article numbers | 176733 |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left |
| Length | 445 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (109581)
- 1x Febi Inner Tie Rod (100791)
£27.56
Important compatibility info
| Weight | 1.9 kg |
| Placement on Vehicle | Rear Axle |
| Length | 389 mm |
| Outer diameter | 111 mm |
| Number of Coils | 7.7 |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 71 °C |
| Weight | 0.177 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 8149182 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (18959)
- 1x Febi Seal, thermostat (11834)
£27.56
Important compatibility info
| Material | Metal |
| Outer diameter | 57 mm |
| Inner diameter | 8.2 mm |
| Weight | 0.293 kg |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.47 kg |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25 |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Filter type | In-Line Filter |
| Function | Filter, venting (fuel tank) |
| Weight | 0.045 kg |
| Length | 156 mm |
| Outer diameter | 47.5 mm |
| Pipe Diameter | 6 mm |
| Type | Filter, venting (fuel tank) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Filter type | Filter Insert |
| Seal Diameter | 100 mm |
| Height | 195 mm |
| Function | Fuel filter |
| Weight | 0.253 kg |
| Inner diameter | 45 mm |
| Type | Fuel filter |
| Outer diameter | 95 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.15 kg |
| Width | 23 mm |
| Number of Teeth | 148 |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
| Replaces | 11123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.839 kg |
| Additional Information 2 | with seal ring |
| Material | Cast Aluminium |
| Number of Teeth | 23 |
| Number of Wings | 8 |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Wire Diameter | 12.5 mm |
| Weight | 1.94 kg |
| Placement on Vehicle | Front Axle |
| Length | 328 mm |
| Outer diameter | 169 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 1.77 kg |
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Outer diameter | 133 mm |
| Function | Suspension Spring |
| Wire Diameter | 11.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Placement on Vehicle | Front Axle, Outer |
| Width | 35 mm |
| Outer diameter | 72 mm |
| Inner diameter | 28 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Bearing / Wheel Bearing |
| Type | Bearing / Wheel Bearing |
| Weight | 0.58 kg |
| Bearing Code | 33207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.74 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 77 00 817 782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.57
Important compatibility info
| Length | 164 mm |
| Height | 151 mm |
| Weight | 0.352 kg |
| Function | Fuel filter |
| Filter type | In-Line Filter |
| Pipe Diameter | 10 mm. 8 mm |
| Width | 134 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.57
Important compatibility info
| Weight | 0.545 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Steering arm type | Control Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| for OE number | 220 350 24 06 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.57
Important compatibility info
| Additional Information 2 | with crown nut |
| Cone Size | 19.5 mm |
| Weight | 1.25 kg |
| Steering arm type | for control arm |
| Mounting points diameter | 12 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.58
Important compatibility info
| Number of Ribs | 7 |
| Weight | 0.196 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Track rollers material | Plastic |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 75 mm |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.58
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Weight | 0.082 kg |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.58
Important compatibility info
| Weight | 0.192 kg |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 175136 |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.58
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170526 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 2.95 kg |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.59
Important compatibility info
| Weight | 0.690 kg |
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1994 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.59
Important compatibility info
| Weight | 1.95 kg |
| Placement on Vehicle | Front Axle |
| Length | 155.3 mm |
| Width | 68.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.59
Important compatibility info
| Weight | 1.72 kg |
| Placement on Vehicle | Front Axle |
| Length | 124.6 mm |
| Width | 70.6 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.60
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Right Rear |
| Weight | 1.56 kg |
| Type | Mounting, engine |
| for OE number | 1H0 199 262 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.60
Important compatibility info
| Weight | 0.739 kg |
| Material | Cast Aluminium |
| Number of Teeth | 21 |
| Number of Wings | 20 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.60
Important compatibility info
| Weight | 1.315 kg |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Length | 114.2 mm |
| Width | 73 mm |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.60
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Coupling Rod |
| Weight | 1.200 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (21357)
- 1x Febi Link/Coupling Rod, stabiliser bar (21358)
- 2x Febi Screw (22248)
- 4x Febi Nut (06877)
£27.61
Important compatibility info
| Placement on Vehicle | Right Rear |
| Weight | 0.942 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 31277314 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.62
Important compatibility info
| Paired article numbers | 194701 |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.780 kg |
| Cone Size | 18 mm |
| Type | Ball Joint |
| Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.62
Important compatibility info
| Type | Washer Fluid Pump, headlight cleaning |
| Function | Washer Fluid Pump, headlight cleaning |
| Pump Type | Mono Pump |
| Weight | 0.17 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.62
Important compatibility info
| Type | Fuel Filter |
| Weight | 0.326 kg |
| Outer diameter | 84 mm |
| Filter type | Spin-on Filter |
| Inner diameter | 22 mm |
| Function | Fuel Filter |
| Height | 198 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.62
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 503 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Weight | 0.09 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.62
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Weight | 0.072 kg |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.63
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Placement on Vehicle | Rear |
| Weight | 0.460 kg |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.63
Important compatibility info
| Thread Length | 25.8 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 197 mm |
| Material | Steel |
| Outer diameter | 9 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Weight | 0.3 kg |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.63
Important compatibility info
| Function | Valve, crankcase ventilation |
| Type | Valve, crankcase ventilation |
| Extra Description | febi Plus |
| Weight | 0.270 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.64
Important compatibility info
| Number of Connectors / Ports | 4 |
| Colour | White |
| Weight | 0.071 kg |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| for OE number | 701 959 263 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.64
Important compatibility info
| Length | 3648 mm |
| Paired article numbers | 104544 |
| Weight | 0.148 kg |
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 3588 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.64
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023