Proud to be a UK-based company
Contact us
Important compatibility info
| Paired article numbers | 103735 |
| Weight | 0.5 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Upper, Rear Axle Right, Rear |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (101698)
- 1x Febi Bolt, control arm (43442)
- 1x Febi Screw (38098)
- 2x Febi Nut (34653)
£31.11
Important compatibility info
| Length | 259 mm |
| Extra Description | febi Plus |
| External Thread Size | M12 |
| Material | Steel |
| Function | Oil sump |
| Type | Oil sump |
| Additional Information 2 | with seal ring |
| Weight | 0.643 kg |
| Spanner Size | 19 |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.11
Important compatibility info
| Weight | 0.775 kg |
| Width | 34 mm |
| Material | Metal |
| Outer diameter | 60 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| for OE number | 0830.13 |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.11
Important compatibility info
| Weight | 1.316 kg |
| Placement on Vehicle | Rear Axle Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Replaces | 34678 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.11
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Weight | 0.15 kg |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.11
Important compatibility info
| Weight | 0.829 kg |
| Material | Cast Aluminium |
| Number of Teeth | 27 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.12
Important compatibility info
| Weight | 0.48 kg |
| Height | 205 mm |
| Outer diameter | 90 mm |
| Filter type | In-Line Filter, with water separator |
| Pipe Diameter | 10 mm |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.12
Important compatibility info
| Inner diameter | 69 mm |
| Wall Thickness | 4 mm |
| Additional Information 2 | with clamps |
| Hose Length | 140 mm |
| Weight | 0.249 kg |
| Material | NBR (nitrile butadiene rubber) |
| Type | Intake Hose, air filter |
| Function | Intake Hose, air filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Intake Hose, air filter (172076)
- 2x Febi Hose Clamp (48354)
£31.13
Important compatibility info
| External Thread Size | M20 x 1, M20 x 1,5 |
| Weight | 0.980 kg |
| Spanner Size | 42 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Additional Information | with counter nut |
| Outer diameter | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.13
Important compatibility info
| Weight | 0.123 kg |
| Length | 132 mm |
| Number of Connectors / Ports | 4 |
| Function | Sensor, speed |
| Screw length below head | 90 mm |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.13
Important compatibility info
| Weight | 1.310 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (38219)
- 1x Febi Rolling Bearing, suspension strut support mount (31448)
£31.13
Important compatibility info
| Weight | 1.34 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 21.5 mm |
| Mounting points diameter | 12.2 mm |
| Function | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.13
Important compatibility info
| for OE number | 18 30 7 589 503 |
| Weight | 0.31 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.14
Important compatibility info
| Weight | 0.065 kg |
| Width | 15 mm |
| Number of Teeth | 130 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 372 mm |
| Function | Suspension Spring |
| Wire Diameter | 13 mm |
| Weight | 2.210 kg |
| Type | Suspension Spring |
| Outer diameter | 146 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.14
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.650 kg |
| for OE number | 3C0 199 855 L |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.14
Important compatibility info
| Length | 173.4 mm |
| Type | Exhaust Valve |
| Function | Exhaust Valve |
| Extra Description | febi Plus |
| Valve stem diameter | 7.980 mm |
| Valve head diameter | 39 mm |
| Weight | 0.115 kg |
| Notches / Holes Number | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.14
Important compatibility info
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M12 x 1,25 |
| Fitting Depth | 27 mm |
| Weight | 0.029 kg |
| Voltage | 11.5 V |
| Spanner Size | 12 |
| Length | 86.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.14
Important compatibility info
| Weight | 0.701 kg |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.14
Important compatibility info
| Weight | 0.368 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 28285-2F000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023