Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with holder |
| Placement on Vehicle | Rear Axle Left |
| Length | 607 mm |
| Paired article numbers | 179782 |
| Weight | 0.4 kg |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Thickness | 79.2 mm |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
| Opening Temperature | 87 °C |
| Weight | 0.335 kg |
| Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Rated Power | 40 W |
| Voltage | 12 V |
| Placement on Vehicle | Front |
| Weight | 1.05 kg |
| Function | Wiper Motor |
| Type | Wiper Motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Number of Connectors / Ports | 3 |
| Cable Length | 370 mm |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Weight | 0.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Weight | 0.177 kg |
| Inner diameter 2 | 79 mm |
| Inner diameter 1 | 25 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 105 mm |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (188120)
- 1x Febi Molybdenum Grease (02582)
£32.47
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 448 mm |
| Housing Diameter | 18 mm |
| Eject Force | 470 N |
| Stroke | 159 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 250.5 mm |
| Weight | 0.4 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Type | Timing Chain Kit |
| Number of Chain Links | 60 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Weight | 0.228 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (48284)
- 1x Febi Chain Tensioner, oil pump drive (186557)
- 1x Febi Guide, timing chain (183522)
£32.47
Important compatibility info
| Weight | 0.015 kg |
| Placement on Vehicle | Rear Axle |
| Height | 14 mm |
| Material | NBR (nitrile butadiene rubber), FPM (fluoride rubber) |
| Outer diameter | 100 mm |
| Inner diameter | 65 mm |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | both sides |
| Length | 482 mm |
| Housing Diameter | 18 mm |
| Eject Force | 480 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 270.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Width | 26.5 mm |
| Number of Teeth | 122 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Weight | 0.15 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Length | 240 mm |
| Type | Intake Valve |
| Function | Intake Valve |
| Notches / Holes Number | 1 |
| Weight | 0.194 kg |
| Valve head diameter | 47.05 mm |
| Valve stem diameter | 9.275 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 1.506 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 100 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.6 kg |
| Width | 25.4 mm |
| Number of Teeth | 119 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14529)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (02558)
£32.47
Important compatibility info
| Weight | 0.1 kg |
| Opening Temperature | 85 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 800 mm |
| Type | Sensor, wheel speed |
| Additional Information 2 | with screw |
Additional Information
Technical Information
Please compare the connection plug version to precisely identify the parts.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 30 |
| Weight | 1.898 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Expansion Tank, coolant |
| Weight | 0.324 kg |
| Material | PP (Polypropylene) |
| Colour | White |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 49 mm |
| Internal Teeth, wheel side | 21 |
| Weight | 1.860 kg |
| Type | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Function | Joint Kit, drive shaft |
| Outer diameter | 75 mm |
| Length | 147 mm |
| Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Weight | 0.11 kg |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 2.300 kg |
| Placement on Vehicle | Wheel Side |
| Length | 160 mm |
| Outer diameter | 89 mm |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 58 mm |
| Internal Teeth, wheel side | 25 |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.296 kg |
| Placement on Vehicle | both sides |
| Length | 497 mm |
| Eject Force | 510 N |
| Stroke | 181 mm |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Hole Spacing | 130 mm |
| Weight | 1.988 kg |
| Bore Diameter | 23 mm |
| Outer diameter | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Cable Pull, parking brake |
| Length | 835 mm |
| Placement on Vehicle | Rear |
| Type | Cable Pull, parking brake |
| Weight | 0.55 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.48
Important compatibility info
| Weight | 1.433 kg |
| Type | Cable Pull, parking brake |
| Length | 1975 mm |
| Placement on Vehicle | Rear |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.48
Important compatibility info
| Weight | 0.330 kg |
| External Thread Size | M8 x 1,25 |
| Placement on Vehicle | Front Axle |
| Inner diameter | 22 mm |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Fastening Bolt, stabiliser bar (46148)
- 1x Febi Bracket, stabiliser mounting (40443)
- 1x Febi Bracket, stabiliser mounting (40444)
- 2x Febi Mounting, stabiliser bar (46545)
£32.49
Important compatibility info
| Length | 352 mm |
| Paired article numbers | 46286 |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Right |
| Weight | 1.588 kg |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with nut, with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (11818)
- 1x Febi Bellow Kit, steering (12643)
£32.49
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Weight | 0.82 kg |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| for OE number | 77 01 207 537 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22283)
- 1x Febi Rolling Bearing, suspension strut support mount (22305)
£32.49
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| Weight | 0.2 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 110 mm |
| Thickness | 28 mm |
| Inner diameter | 40 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Weight | 0.34 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| Weight | 0.370 kg |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Weight | 0.71 kg |
| Width | 30 mm |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 352 mm |
| Paired article numbers | 46287 |
| Function | Tie Rod |
| Weight | 1.588 kg |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with nut, with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (11817)
- 1x Febi Bellow Kit, steering (12643)
£32.49
Important compatibility info
| Weight | 0.043 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 708 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.26 kg |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (32787)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
£32.50
Important compatibility info
| Weight | 0.552 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.50
Important compatibility info
| Weight | 0.944 kg |
| Placement on Vehicle | Front Axle Left, Upper, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40743 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31332)
- 1x Febi Screw (31032)
- 1x Febi Nut (22263)
- 1x Febi Bolt, control arm (39749)
- 1x Febi Nut (32615)
- 1x Febi Washer (39748)
- 1x Febi Screw (21478)
- 1x Febi Nut (24799)
- 1x Febi Screw (24796)
- 1x Febi Nut (14392)
£32.50
Important compatibility info
| Length | 149 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Weight | 0.09 kg |
| Type | Sensor, camshaft position |
| Additional Information | with holder |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.50
Important compatibility info
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.4 kg |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.50
Important compatibility info
| Weight | 1.9 kg |
| Function | Spring, driver cab suspension |
| Thickness | 270 mm |
| Outer diameter | 89 mm |
| Placement on Vehicle | Front, Rear |
| Type | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.029 kg |
| Length | 24 mm |
| Function | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Weight | 0.38 kg |
| Material | Plastic |
| Function | Washer Fluid Reservoir, window cleaning |
| Section | Lower Section |
| Extra Description | febi Plus |
| Type | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Inner diameter | 11 mm |
| Weight | 0.303 kg |
| Mounting points diameter | 11 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Weight | 0.211 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Function | Mounting, stabiliser bar |
| Outer diameter | 89 mm |
| Weight | 2.931 kg |
| Placement on Vehicle | Rear Axle |
| Length | 172 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Placement on Vehicle | Rear |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Weight | 0.662 kg |
| Colour Coding | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Weight | 0.696 kg |
| Material | Metal |
| Outer diameter | 78 mm |
| Mounting points diameter | 10 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.51
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 30 |
| Weight | 2.076 kg |
| Number of Teeth, ABS ring | 44 |
| ABS Ring Diameter | 70 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.52
Important compatibility info
| Weight | 0.914 kg |
| Material | Cast Aluminium |
| Number of Teeth | 20 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Replaces | 02086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.52
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 3.350 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 260 mm |
| Thickness | 31 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Number of mounting bores | 4 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.52
Important compatibility info
| Weight | 2.982 kg |
| Placement on Vehicle | Front Axle |
| Length | 175 mm |
| Width | 79.3 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Model | DEFENDER DISCOVERY DISCOVERY SPORT E-PACE EVOQUE SPORT |
| Manufacturer | JAGUAR LAND ROVER RANGE ROVER |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023