Proud to be a UK-based company
Contact us
Important compatibility info
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 302 mm |
| Weight | 1.13 kg |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Min. Length | 207 mm |
| Pipe Diameter | 44 mm. 54 mm |
| External Thread Size | M12 x 1,75 |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.099 kg |
| Function | Tie Rod |
| Paired article numbers | 49065 |
| Length | 370 mm |
| Placement on Vehicle | Front Axle Left |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod |
| External Thread Size | M12 x 1,5 |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19336)
- 1x Febi Inner Tie Rod (32597)
- 1x Febi Bellow, steering (39602)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
£34.49
Important compatibility info
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Min. Length | 339 mm |
| Weight | 3.580 kg |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Max. Length | 518 mm |
| Paired article numbers | 193112 |
| Placement on Vehicle | Front Axle Right |
| Mounting points diameter | 13 mm |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.155 kg |
| Inner diameter 2 | 32.19 mm |
| Inner diameter 1 | 19.08 mm |
| Function | Connecting Rod, air compressor |
| Type | Connecting Rod, air compressor |
| Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.450 kg |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 38971 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (38968)
- 1x Febi Inner Tie Rod (36505)
£34.49
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | transmission sided, Front Axle |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 72 mm |
| Inner diameter 1 | 27 mm |
| Length | 109 mm |
| Joint Type | Tripod Joint |
| Weight | 0.198 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (178828)
- 1x Febi Molybdenum Grease (02582)
£34.49
Important compatibility info
| ABS Ring Diameter | 104 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Weight | 2.858 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 38 |
| Internal Teeth, wheel side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow, driver cab suspension |
| Type | Bellow, driver cab suspension |
| Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Weight | 0.346 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.043 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 605 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.420 kg |
| Length | 395 mm |
| Height | 155 mm |
| Width | 155 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 400 mm |
| Outer diameter | 121 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Weight | 3.23 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.060 kg |
| Extra Description | febi Plus |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Cable Length | 157 mm |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
| Additional Information 2 | with seal ring |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.23 kg |
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Width | 27 mm |
| Outer diameter | 125 mm |
| Inner diameter | 70 mm |
| Bearing Type | Cylindrical Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Weight | 1.099 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Length | 333 mm |
| Paired article numbers | 49063 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (39602)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
- 1x Febi Tie Rod End (19342)
- 1x Febi Inner Tie Rod (32597)
£34.49
Important compatibility info
| Weight | 2.060 kg |
| Outer diameter | 84.5 mm |
| Internal Teeth, wheel side | 23 |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 58 mm |
| Function | Joint Kit, drive shaft |
| Length | 149 mm |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 362 mm |
| Function | Suspension Spring |
| Weight | 1.754 kg |
| Wire Diameter | 10.8 mm |
| Type | Suspension Spring |
| Outer diameter | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Angled Ball Joint, steering drag link / Tie Rod End |
| Type | Angled Ball Joint, steering drag link / Tie Rod End |
| Length | 158 mm |
| Weight | 1.950 kg |
| External Thread Size | M30 x 1,5 |
| Internal Thread Size | M24 x 1,5 |
| Spanner Size | 36 |
| Extra Description | ProKit |
| Thread Type | with right-hand thread |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Length | 1263 mm |
| Outer diameter | 3.24 mm |
| Inner diameter | 2 mm |
| Weight | 0.14 kg |
| External Thread Size | M12 x 1,5, M12 x 1 |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
| Pressure | 362 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.06 kg |
| Opening Temperature | 79 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023