Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 33 |
| Weight | 2.396 kg |
| Number of Teeth, ABS ring | 43 |
| ABS Ring Diameter | 82 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.066 kg |
| Length | 1290 mm |
| Paired article numbers | 171435 |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106633 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1610 mm |
| Function | Sensor, wheel speed |
| Weight | 0.070 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Bush Set, axle beam |
| Weight | 1.867 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (10256)
- 2x Febi Screw (02535)
- 2x Febi Washer (02514)
£35.44
Important compatibility info
| Weight | 0.342 kg |
| Width of castor bearing surface | 34 mm |
| Material | Metal |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 60 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Weight | 2.160 kg |
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Outer diameter | 39 mm |
| Weight | 1.432 kg |
| Bolt Hole Circle Diameter | 110 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | with wheel studs, without wheel bearing |
| Inner diameter | 29 mm |
| Width | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.656 kg |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Weight | 0.54 kg |
| Number of Connectors / Ports | 2 |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | without lid |
| for OE number | 13 04 017 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Cable Repair Kit, tailgate |
| Cable Length | 300 mm |
| Number of circuits | 9 |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Material | Rubber/Metal, Plastic |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.83 kg |
| Type | Mounting, engine |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 1.54 kg |
| Placement on Vehicle | Right Front |
| Material | Cast Aluminium, Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 605 mm |
| Housing Diameter | 22 mm |
| Eject Force | 670 N |
| Stroke | 233 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 343.5 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.411 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 102 mm |
| Width | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 90 mm |
| Thickness | 90 mm |
| Inner diameter | 33 mm |
| Function | Mounting, stabiliser bar |
| Weight | 1.469 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Material | Aluminium |
| Transmission Type | Automatic Transmission |
| Weight | 0.885 kg |
| Type | Oil Cooler, automatic transmission |
| Function | Oil Cooler, automatic transmission |
| Core Length | 139 mm |
| Core Width | 80 mm |
| Core Depth | 69 mm |
| Additional Information | with seal rings |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.25 kg |
| Outer diameter | 70 mm |
| Function | Tensioner Pulley, timing belt |
| Material | Plastic |
| Width | 32 mm |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Cable Pull, clutch control |
| Type | Cable Pull, clutch control |
| Weight | 0.330 kg |
| Inner Length | 387 mm |
| Outer Length | 590 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.781 kg |
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 2.086 kg |
| Width | 75.6 mm |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 13.8 mm |
| Length | 121 mm |
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.06 kg |
| Opening Temperature | 79 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023