Important compatibility info
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Voltage | 12 V |
Extra Description | febi Plus |
Function | Pressure Converter, exhaust control |
Type | Pressure Converter, exhaust control |
Weight | 0.210 kg |
for OE number | 1K0 906 627 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Ignition Coil |
Function | Ignition Coil |
for OE number | 27301-04000 |
Weight | 0.195 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with indicator function, with light dimmer function |
Weight | 0.28 kg |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 14246 |
Weight | 2.5252 kg |
Placement on Vehicle | Front Axle Right, Lower |
Replaces | 06505 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with brake caliper screws, with guide sleeve |
Placement on Vehicle | Front Axle, Rear Axle |
Function | Repair Kit, brake caliper |
Additional Information | with grease |
Type | Repair Kit, brake caliper |
Weight | 2.14 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Relay Valve |
Internal Thread Size | M22 x 1,5, M16 x 1,5 |
Number of Connectors / Ports | 4 |
Weight | 0.775 kg |
Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.64 kg |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 8A0 121 403 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 375.5 mm |
Length | 565 mm |
Placement on Vehicle | both sides |
Mounting points diameter | 17.8 mm |
Housing Diameter | 22 mm |
Eject Force | 905 N |
Stroke | 139 mm |
Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.720 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 200 mm |
Height | 32 mm |
Width | 193 mm |
Filter type | Screen Filter |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information 2 | with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
Weight | 0.262 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear |
Weight | 0.610 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
External Teeth, Wheel Side | 31 |
Weight | 2.802 kg |
Internal Teeth, wheel side | 28 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Thread Size | M24 x 2,0 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner Brake Drum Diameter | 413 mm |
Function | Brake Lining, drum brake |
Weight | 7.0 kg |
Type | Brake Lining, drum brake |
Number of Holes | 16 |
Width | 178 mm |
Placement on Vehicle | Rear Axle, Front Axle |
Number of pads | 4 |
Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.135 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 170678 |
Number of Connectors / Ports | 2 |
Resistance | 1300 Ohm |
Cable Length | 669 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | Right |
Weight | 1.100 kg |
for OE number | 50880-SNA-A02 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2523 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Weight | 0.362 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod |
Length | 332 mm |
Paired article numbers | 44288 |
Manufacturer Restriction | TKP |
Placement on Vehicle | Front Axle Left |
Extra Description | ProKit |
Weight | 1.34 kg |
External Thread Size | M16 x 1,5, M14 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Bellow Kit, steering (43550)
- 1x Febi Tie Rod End (44281)
Important compatibility info
Weight | 0.658 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37 mm |
Outer diameter | 74 mm |
Inner diameter | 38 mm |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Weight | 0.55 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023