Proud to be a UK-based company
Contact us
Important compatibility info
| for OE number | 3093100 |
| Function | Repair Kit, clutch slave cylinder |
| Weight | 0.134 kg |
| Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.93
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Additional Information | with grease |
| Additional Information 2 | with screw |
| Thread Size | M10 x 1,5 |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 26 |
| Weight | 2.088 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Length | 138 mm |
| Surface | Phosphatized |
| Thread Length | 109 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 11.9 |
| Shaft Length | 14 mm |
| Type | Centering Bolt, crankshaft pulley |
| Function | Centering Bolt, crankshaft pulley |
| Weight | 0.410 kg |
| Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Weight | 0.902 kg |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 220 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Upper |
| Additional Information 2 | with clamps |
| Weight | 0.18 kg |
| Function | Charge Air Hose |
| Inner diameter | 56 mm |
| Outer diameter | 63 mm |
| Turbocharger line | Piping to charge air cooler |
| Colour | Red |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Weight | 0.326 kg |
| Width of castor bearing surface | 25 mm |
| Material | Metal |
| Outer diameter | 65 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Filter type | Spin-on Filter, with water drain screw |
| Function | Fuel filter |
| Weight | 0.321 kg |
| Internal Thread Size | 3/8" - 16 UNF |
| Height | 196 mm |
| Outer diameter | 85 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.95
Important compatibility info
| Type | Mounting, differential |
| Placement on Vehicle | Rear Axle Left |
| Material | Rubber/Metal |
| Inner diameter | 17.4 mm |
| Thickness | 60 mm |
| Weight | 0.439 kg |
| Outer diameter | 69.6 mm |
| Function | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.95
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.720 kg |
| for OE number | 2N0 412 303 J S1 |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187820)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
£36.96
Important compatibility info
| Material | Metal |
| Thickness | 1 mm |
| Function | Gasket, cylinder head |
| Number of Holes | 1 |
| Weight | 0.28 kg |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.96
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.050 kg |
| Function | Sensor, camshaft position |
| Length | 24 mm |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.96
Important compatibility info
| Weight | 0.62 kg |
| Placement on Vehicle | Upper, Rear |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.96
Important compatibility info
| Paired article numbers | 181148 |
| Brake caliper piston diameter | 35 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 1.282 kg |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 35 mm |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181149 |
| Weight | 1.282 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Outer diameter 1 | 61 mm |
| Outer diameter 2 | 94 mm |
| Bearing Type | Needle Bearing |
| Type | Bush, steering knuckle |
| Weight | 0.864 kg |
| Function | Bush, steering knuckle |
| Inner diameter | 52 mm |
| Thickness | 77 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Weight | 0.025 kg |
| Outer diameter | 12.9 mm |
| Thickness | 43.45 mm |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| Additional Information 2 | with seal ring |
| for OE number | 006 153 47 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.98
Important compatibility info
| Weight | 0.734 kg |
| Outer diameter | 65 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.98
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 15.5 mm |
| Weight | 3.02 kg |
| Outer diameter | 132 mm |
| Length | 300 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.98
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 279 mm |
| Thickness | 55.8 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 4.360 kg |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.99
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Weight | 0.550 kg |
| for OE number | 21 52 6 785 966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.00
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023