Important compatibility info
Function | Adjuster, braking system |
Operating Mode | Manual |
Placement on Vehicle | Right |
Type | Adjuster, braking system |
Weight | 2.828 kg |
Paired article numbers | 178698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 18 mm. 20 mm |
Material | ACM (Polyacrylate) |
Outer diameter | 160 mm. 190 mm |
Inner diameter | 125 mm |
Function | Shaft Seal, wheel bearing |
Weight | 0.600 kg |
Type | Shaft Seal, wheel bearing |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Opening Temperature | 90 °C |
Outer diameter | 48 mm |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 50 mm |
Internal Teeth, wheel side | 23 |
Weight | 2.170 kg |
Number of Teeth, ABS ring | 44 |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 25 |
Outer diameter | 87 mm |
Length | 158 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 1.64 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.342 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 09524 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 570 mm |
Number of circuits | 8 |
Function | Cable Repair Set, boot lid |
Extra Description | febi Plus |
Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.54 kg |
Length | 162 mm |
Bolt Head/Nut Design | Male Torx |
Quality/ Grade | 10.9 |
Function | Cylinder Head Bolt Set |
Number of screws | 10 |
Screw length below head | 147 mm |
External Thread Size | M12 x 1,5 |
Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 10x Febi Cylinder Head Bolt (01825)
Important compatibility info
Weight | 0.045 kg |
Placement on Vehicle | Rear Axle Left |
Length | 800 mm |
Paired article numbers | 38375 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023