Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.152 kg |
| Fill Medium | Brake Fluid |
| Bore Diameter | 19 mm |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Weight | 1.09 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 46338675 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 1.05 kg |
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (07479)
- 2x Febi Holder, brake camshaft seal ring (07480)
- 2x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Shaft Seal, brake camshaft (07494)
- 1x Febi Stop Plate, adjuster (07483)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07495)
- 1x Febi Spacer, brake shaft (07486)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07491)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
£38.45
Important compatibility info
| Pipe Diameter | 64.5 mm. 42.5 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 337 mm |
| Min. Length | 228 mm |
| Weight | 1.924 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Left Front, Right Front |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 522 mm |
| Housing Diameter | 19 mm |
| Weight | 0.2 kg |
| Stroke | 154 mm |
| Eject Force | 635 N |
| Housing length | 303 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.632 kg |
| Housing material | Metal |
| Operating Mode | Automatic |
| Outer diameter | 66 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Weight | 0.71 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Length | 80 mm |
| Width | 75 mm |
| Material | Rubber/Metal |
| Outer diameter | 75 mm |
| Thickness | 80 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Weight | 0.977 kg |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Teeth | 20 |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Width | 33 mm |
| Material | Plastic |
| Outer diameter | 153 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.16 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179458 |
| Weight | 2.123 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.47
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179455 |
| Weight | 2.125 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.47
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Weight | 0.894 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.47
Important compatibility info
| Weight | 0.82 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 51773551 |
| Type | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with screw |
| Width of castor bearing surface | 25.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.47
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.092 kg |
| Cable Length | 410 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.47
Important compatibility info
| Number of Holes | 6 |
| Weight | 0.62 kg |
| Outer diameter | 129 mm |
| Thickness | 24 mm |
| Inner diameter | 41 mm |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Height | 28.5 mm |
| Mounting points diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.47
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Lower |
| Weight | 0.800 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.47
Important compatibility info
| Weight | 1.07 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (31401)
£38.47
Important compatibility info
| Dust Cover | with dust cover |
| Weight | 1.250 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 48 mm |
| Outer diameter | 80 mm |
| Inner diameter | 45 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.48
Important compatibility info
| Weight | 2.24 kg |
| Height | 443 mm |
| Outer diameter | 269 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Inner diameter | 145 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.48
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.06 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 286 mm |
| Thickness | 51.7 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023