Important compatibility info
Weight | 0.135 kg |
Voltage | 24 V |
Operating Mode | Electronic |
Number of Connectors / Ports | 9 |
Function | Flasher Unit |
Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Type | Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with lock nut |
Paired article numbers | 186570 |
Weight | 1.111 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M12 x 1,5, M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26097)
- 1x Febi Inner Tie Rod (185895)
Important compatibility info
Transmission Type | 5-Speed Manual Transmission |
Weight | 0.478 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Transmission ID | MQ200 |
Inner length 1 | 852 mm |
Outer length 1 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.331 kg |
Material | PA (polyamide) |
Type | Pipe, oil filler neck |
Function | Pipe, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Opening Temperature | 80 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal, with temperature sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.588 kg |
Length | 138 mm |
Width | 90 mm |
Material | Aluminium |
Thickness | 88 mm |
Function | Oil Cooler, engine oil |
Additional Information | with gasket/seal |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (100798)
- 1x Febi Gasket, oil cooler (48367)
Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.12 kg |
Length | 60 mm |
Outer diameter | 39.5 mm. 45.5 mm |
Spanner Size | 17 |
Thread Length | 12 mm |
Number of Connectors / Ports | 1 |
Function | Sensor, oil pressure |
Switch point to | 3 bar |
External Thread Size | M12 x 1,5 |
Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with trapezoidal tooth profile |
Width | 15 mm |
Number of Teeth | 104 |
Surface | Coated |
Water pump impeller material | Plastic |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
Important compatibility info
Outer diameter | 69 mm |
Outer diameter 1 | 65 mm |
Function | Charge Air Hose |
Additional Information 2 | with quick couplers |
Turbocharger line | Turbocharger to charge air cooler |
Placement on Vehicle | Charge Air Cooler, Right |
for OE number | 1K0 145 832 B |
Type | Charge Air Hose |
Weight | 0.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.666 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (31416)
- 1x Febi Oil Filter (24661)
- 1x Febi Fuel filter (26820)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
Placement on Vehicle | both sides |
Length | 696 mm |
Weight | 0.2 kg |
Housing Diameter | 19 mm |
Eject Force | 630 N |
Stroke | 163 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 488 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Kit, cylinder head |
for OE number | 541 016 13 20 S1 |
Type | Gasket Kit, cylinder head |
Weight | 1.927 kg |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head (39484)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
- 1x Febi Gasket, cylinder head cover (28685)
- 2x Febi Screw (46116)
- 4x Febi Cylinder Head Bolt (12200)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Pipe Diameter | 18 mm |
Paired article numbers | 25188 |
Length | 400 mm |
Weight | 1.188 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left |
Rod/Strut | Pull Rod |
Paired article numbers | 23965 |
Weight | 0.548 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 06773; 06788 |
Height | 474 mm |
Outer diameter | 302 mm |
Inner diameter | 191 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.850 kg |
Placement on Vehicle | Right Rear |
Length | 2332 mm |
Paired article numbers | 171090 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.110 kg |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M22 x 1,5 |
Length | 162 mm |
Internal Teeth, wheel side | 25 |
Outer diameter | 90 mm |
Weight | 2.540 kg |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 30 |
Seal Diameter | 85.6 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023