Important compatibility info
Width | 19.2 mm. 21.9 mm |
Outer diameter | 53.1 mm. 63 mm |
Inner diameter | 47.7 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
for OE number | 5131.A6 S2 |
Function | Repair Kit, axle beam |
Weight | 0.19 kg |
Type | Repair Kit, axle beam |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 299 mm |
Width | 202 mm |
Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) |
Thickness | 24 mm |
Voltage | 12 V |
Operating Mode | Manual |
Outer/Inner Mirror | Heatable, Convex |
Weight | 0.471 kg |
Section | Upper section |
Type | Mirror Glass, exterior mirror |
Camber Radius | 1200 mm |
Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Length | 138 mm |
Width | 89 mm |
Material | Aluminium |
Thickness | 44.5 mm |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5 |
Number of circuits | 4 |
Function | Oxygen Sensor |
Cable Length | 525 mm |
Weight | 0.44 kg |
Spanner Size | 22 |
Type | Oxygen Sensor |
Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.160 kg |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
for OE number | 4F0 721 257 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.26 kg |
Additional Information | with fastening/mounting material |
Thickness/Strength 1 | 5.5 mm |
Outer diameter | 186 mm |
Inspection Tag | ECE R90 Approved |
Function | Brake Shoe Set, parking brake |
Placement on Vehicle | Rear Axle |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.210 kg |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from water pipe to auxiliary water pump, from engine to engine cooler |
Weight | 0.73 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information | with quick coupling |
Placement on Vehicle | Upper |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.55 kg |
Placement on Vehicle | Left |
Material | Cast Aluminium, Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.430 kg |
Placement on Vehicle | inner, both sides |
Length | 114.5 mm. 175 mm |
Thickness | 71 mm. 35 mm |
Inner diameter | 20 mm. 13 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.526 kg |
Length | 186 mm |
Outer diameter | 30 mm |
Paired article numbers | 08802 |
Function | Repair Kit, kingpin |
Additional Information | with Thrust Bearing |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (08804)
- 2x Febi Bush, steering knuckle (08805)
- 2x Febi Bush, steering knuckle (08806)
- 1x Febi Bush, steering knuckle (04298)
- 1x Febi Kingpin (01432)
- 2x Febi Circlip, kingpin (02668)
- 2x Febi Seal Ring, steering knuckle (08807)
- 2x Febi Lock Ring, steering knuckle (08532)
- 2x Febi Seal Ring, steering knuckle (08533)
- 1x Febi Nut (02574)
- 1x Febi Springwasher (07583)
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 367 mm |
Outer diameter | 127 mm |
Weight | 1.8 kg |
Number of Coils | 5.8 |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Function | Ignition Coil |
Number of Connectors / Ports | 4 |
Type | Ignition Coil |
Replaces | 37318 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.707 kg |
Outer diameter | 138 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 124 mm |
Parameter | VL100R |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.3 kg |
Placement on Vehicle | Rear Axle |
Type | Repair Kit, brake caliper |
Function | Repair Kit, brake caliper |
for OE number | MCK1298 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 179982 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right, Upper |
Weight | 1.5 kg |
Steering arm type | Control Arm |
Material | Aluminium |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.535 kg |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 126 |
Function | Timing Chain |
Timing Chain Size | G68WN, G68V |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 800 mm |
Additional Information 2 | with tensioner element |
Number of Ribs | 6 |
Operating Mode | Automatic |
Weight | 0.676 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38250)
- 1x Febi Belt Tensioner, v-ribbed belt (181682)
Important compatibility info
Weight | 1.09 kg |
Placement on Vehicle | Rear Axle Left, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40364 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (28293)
- 1x Febi Screw (38199)
- 1x Febi Nut (37448)
Important compatibility info
Weight | 1.131 kg |
Height | 195 mm |
Width | 180 mm |
Inner diameter | 64 mm |
Function | Charge Air Hose |
Turbocharger line | Turbocharger to Inlet Manifold |
Type | Charge Air Hose |
Hose Length | 570 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023