Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.800 kg |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.16
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
| Inner diameter | 93 mm |
| Placement on Vehicle | transmission sided |
| Height | 23.5 mm. 11.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 227 mm |
| Outer diameter 1 | 159 mm |
| Weight | 0.30 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.95 kg |
| Cable Length | 450 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 1.47 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Paired article numbers | 178173 |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 178172 |
| Weight | 1.47 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 5.340 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm |
| Thickness | 63.4 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.75 kg |
| Type | Mounting, engine |
| Placement on Vehicle | Rear, Upper |
| for OE number | LR 000597 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 1.021 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 2.147 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.20
Important compatibility info
| Weight | 0.090 kg |
| Placement on Vehicle | Rear |
| Colour | Black |
| Function | Cupholder |
| Extra Description | febi Plus |
| Type | Cupholder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.20
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 0.102 kg |
| Width | 18 mm |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.22
Important compatibility info
| Length | 117 mm |
| Voltage | 11 V |
| Spanner Size | 12 |
| Weight | 0.04 kg |
| Fitting Depth | 30 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.23
Important compatibility info
| Weight | 0.42 kg |
| Function | Tensioner Pulley, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Type | Tensioner Pulley, v-ribbed belt |
| Width | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.23
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.619 kg |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.24
Important compatibility info
| Weight | 0.078 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, switch module |
| Additional Information 2 | with seal ring |
| Type | Sensor, switch module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.26
Important compatibility info
| Steering arm type | for control arm |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Lower Front Axle, both sides |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Weight | 1.340 kg |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting, control/trailing arm (18688)
- 2x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£44.27
Important compatibility info
| Mounting points diameter | 21 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 151 mm |
| Outer diameter | 84 mm |
| Weight | 2.545 kg |
| Type | Mounting, control/trailing arm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.27
Important compatibility info
| Weight | 1.79 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Housing length | 276 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.7 mm |
| Stroke | 190 mm |
| Eject Force | 400 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Length | 492 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Length | 51.5 mm |
| Outer diameter | 31 mm |
| Weight | 0.119 kg |
| Function | Centering Sleeve, propshaft |
| Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023