Important compatibility info
Length | 135 mm |
Width | 85 mm |
Function | Thermostat, coolant |
Thickness | 76 mm |
Opening Temperature | 87 °C |
Weight | 0.355 kg |
Type | Thermostat, coolant |
Additional Information | with temperature sensor, with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.880 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 8631698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.024 kg |
Number of Connectors / Ports | 4 |
Function | Sensor, intake manifold pressure |
Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 67 mm |
Width | 70 mm |
Thickness | 67 mm |
Weight | 0.75 kg |
Inner diameter | 16 mm |
Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
Outer diameter | 70.5 mm |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 51 mm |
Additional Information 2 | with guide sleeve |
Outer diameter | 58 mm |
Type | Needle Bearing, axle beam |
Function | Needle Bearing, axle beam |
Weight | 0.24 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.973 kg |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 17 mm |
Number of Ribs | 5 |
Function | Alternator Freewheel Clutch |
Width | 40.3 mm |
Outer diameter | 57 mm |
Weight | 0.480 kg |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
for OE number | 37322-2A000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 12 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | FPM (fluoride rubber) |
Function | Gasket Set, cylinder head cover |
Weight | 0.282 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Weight | 1.100 kg |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 192 mm |
Type | Roll-off Piston, air suspension bellows |
Colour | Black |
Function | Roll-off Piston, air suspension bellows |
Weight | 4.3 kg |
Thickness | 201 mm |
Inner diameter | 13 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Weight | 1.32 kg |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | both sides |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.164 kg |
Inner diameter 2 | 74 mm |
Inner diameter 1 | 23 mm |
Material | Thermoplastic polyester elastomer |
Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (37086)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | Pressure Limiting Valve |
Weight | 0.4 kg |
Operating pressure to | 6.5 bar |
Function | Pressure Limiting Valve |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.13 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 68 mm |
Weight | 0.660 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Turbocharger line | Piping to charge air cooler |
Placement on Vehicle | Charge Air Cooler, Left |
Additional Information | with quick coupling |
Material | CR (chloroprene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.900 kg |
Material | Rubber/Metal |
Hole Spacing | 110 mm |
Placement on Vehicle | Front, Lower |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1020 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.07 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Outer diameter | 128 mm |
Thickness | 20 mm |
Additional Information 2 | with bolts/screws, with washers |
Inner diameter | 41 mm |
Placement on Vehicle | Front and Rear |
Bolt Hole Circle Diameter | 90 mm |
Function | Joint, propshaft |
Extra Description | ProKit |
Type | Joint, propshaft |
Weight | 0.9 kg |
Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (07543)
- 6x Febi Bolt, drive shaft flange (04678)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
Type | Water Pump, engine cooling |
Seal Material | Rubber |
Additional Information | with gasket/seal |
Weight | 0.665 kg |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Number of Wings | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023