Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178113 |
| Weight | 2.86 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.14
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.050 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.14
Important compatibility info
| Width | 27 mm |
| Material | Metal |
| Outer diameter | 72 mm |
| Inner diameter | 10.5 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Weight | 0.35 kg |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.15
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.086 kg |
| Cable Length | 355 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.15
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 24.6 mm |
| Outer diameter | 121.5 mm |
| Inner diameter | 77.7 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Weight | 0.9 kg |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.16
Important compatibility info
| Placement on Vehicle | Upper Front Axle, Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 02941 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.130 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.17
Important compatibility info
| Weight | 1.106 kg |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left Front, Right Front |
| Type | Mounting, engine |
| Replaces | 05302; 05863; 05864; 05865 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.17
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.106 kg |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.17
Important compatibility info
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Extra Description | febi Plus |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Weight | 0.06 kg |
| Outer diameter | 35.5 mm |
| Additional Information | for multi-plate clutch, with gasket/seal |
| Height | 55 mm |
| Clutch ID | Haldex Gen IV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 173557 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1690 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.068 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Width | 86 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Weight | 4.04 kg |
| Length | 180 mm |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 20 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Weight | 1.1 kg |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 16100-39565 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.18
Important compatibility info
| Weight | 1.510 kg |
| Outer diameter 1 | 131 mm |
| Outer diameter 2 | 39 mm |
| External Thread Size | M12 x 1,5 |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | with wheel studs, without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.19
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 0.760 kg |
| for OE number | 52004329 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.21
Important compatibility info
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Number of mounting bores | 2 |
| Weight | 5.250 kg |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Brake Disc Thickness | 25 mm |
| Thickness | 49 mm |
| Minimum thickness | 23 mm |
| Outer diameter | 255 mm |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.21
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil sump |
| External Thread Size | M10 |
| Spanner Size | 12 |
| Additional Information 2 | with seal ring |
| Type | Oil sump |
| Length | 459 mm |
| Weight | 1.979 kg |
| Wet Sump Material | Sheet Steel |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.22
Important compatibility info
| Weight | 2.354 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 180924 |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.23
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Weight | 2.354 kg |
| Paired article numbers | 180923 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.23
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 675 mm |
| Weight | 0.050 kg |
| Type | Sensor, exhaust gas temperature |
| Internal Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.26
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Front |
| Weight | 1.542 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023