Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.16 kg |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.21
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Outer diameter | 153 mm |
| Thickness | 32 mm |
| Inner diameter | 48 mm |
| Number of Ribs | 5 |
| Colour | Black |
| Parameter | 6PK |
| Weight | 1.79 kg |
| Type | Belt Pulley, crankshaft |
| Hole Spacing | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.21
Important compatibility info
| Weight | 0.16 kg |
| Operating Mode | Hydraulic |
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.21
Important compatibility info
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 155 mm |
| Thickness | 37 mm |
| Inner diameter | 33 mm |
| Type | Belt Pulley, crankshaft |
| Weight | 1.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.21
Important compatibility info
| Inner diameter | 398 mm |
| Number of Teeth | 143 |
| Width | 18 mm |
| Function | Ring Gear, flywheel |
| Outer diameter | 435 mm |
| Weight | 2.658 kg |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.23
Important compatibility info
| Weight | 0.975 kg |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid, with breather valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.23
Important compatibility info
| Weight | 0.57 kg |
| Function | Oil Cooler, automatic transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.24
Important compatibility info
| Weight | 0.482 kg |
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 22.2 mm |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.24
Important compatibility info
| Material | Metal |
| Outer diameter | 80 mm |
| Operating Mode | Automatic |
| Weight | 1.079 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.070 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Cable Length | 520 mm |
| Placement on Vehicle | after catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Outer diameter | 53 mm |
| Function | Joint, propshaft |
| Weight | 3.131 kg |
| Length | 135 mm |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 3.900 kg |
| Placement on Vehicle | Rear Axle |
| Length | 350 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 28.9 mm. 32.0 mm |
| Extra Description | ProKit |
| External Thread Size | M22 x 1,5, M24 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (27254)
- 2x Febi Nut, stabiliser bar (27249)
£53.25
Important compatibility info
| Outer diameter | 158 mm |
| Weight | 3.1 kg |
| Placement on Vehicle | Rear Axle |
| Length | 263 mm |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Cone Size | 18 mm |
| Weight | 2.65 kg |
| Paired article numbers | 178855 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Upper, Front Axle Left |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Weight | 1.6 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 335 mm |
| Min. Length | 221 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Ignition Coil |
| Ignition Coil | 4 Spark |
| Number of Connectors / Ports | 4 |
| Type | Ignition Coil |
| Weight | 0.820 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.353 kg |
| Number of Connectors / Ports | 2 |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.120 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 78 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Width | 15 mm |
| Number of Teeth | 125 |
| Surface | Coated |
| Water pump impeller material | Metal |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 0.985 kg |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (19657)
- 1x Febi Water Pump, engine cooling (33957)
£53.25
Important compatibility info
| Function | Tappet |
| Weight | 0.364 kg |
| Type | Tappet |
| Outer diameter | 35.5 mm |
| Thickness | 92 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023