Important compatibility info
Material | Cast Aluminium |
Number of Wings | 4 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Weight | 1.641 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with coolant level sensor |
Material | Plastic |
Function | Expansion Tank, coolant |
Weight | 1.22 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 17 13 7 542 986 |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Driver Position | for right-hand drive vehicles |
Placement on Vehicle | Front Axle |
Function | Idler Arm |
Weight | 1.4 kg |
Type | Idler Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 182230 |
Weight | 3.152 kg |
Cone Size | 20 mm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.591 kg |
Material | Plastic |
Colour | Black |
Function | Expansion Tank, coolant |
Number of Connectors / Ports | 2 |
Type | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Additional Information 2 | without lid |
for OE number | 17 13 8 616 418 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Material | Plastic |
Weight | 0.59 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of circuits | 12 |
Function | Cable Repair Set, door |
Cable Length | 200 mm |
Placement on Vehicle | Rear, both sides |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.248 kg |
External Thread Size | M8 x 1,25 |
Length | 110 mm |
Number of Connectors / Ports | 3 |
Mounting points diameter | 8.6 mm |
Function | Sensor, pneumatic suspension level |
Type | Sensor, pneumatic suspension level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.422 kg |
External Teeth, Wheel Side | 36 |
Bore Diameter | 10.5 mm |
Bolt Hole Circle Diameter | 94 mm |
Thread Size | M20x1,5 |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 97 mm |
Number of mounting bores | 6 |
Min. Length | 517 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 108 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 42 mm |
Outer diameter | 155 mm |
Inner diameter | 25 mm |
Number of Ribs | 6 |
Parameter | 7PK |
Function | Belt Pulley, crankshaft |
Weight | 2.340 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Material | Steel |
Length | 170 mm |
Rod/Strut | Coupling Rod |
Weight | 0.465 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 15 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.390 kg |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.172 kg |
Mounting points diameter | 6.5 mm |
Type | Solenoid Valve, shift cylinder |
Internal Thread Size | M10 x 1 |
Function | Solenoid Valve, shift cylinder |
Length | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 283 mm |
Additional Information | Change interval/date according to gas spring imprint |
Function | Gas Spring, bonnet |
Housing length | 161.5 mm |
Weight | 0.2 kg |
Housing Diameter | 18 mm |
Eject Force | 395 N |
Stroke | 90 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.162 kg |
Placement on Vehicle | Rear Axle |
Type | Gasket Set, external planetary gearbox |
Function | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (06643)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
Important compatibility info
Weight | 4.3 kg |
Additional Information | with nuts |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Rear Axle |
Length | 435 mm |
Rod/Strut | Coupling Rod |
Cone Size | 32.2 mm |
Adjustable | not adjustable |
Pipe Diameter | 36 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.416 kg |
Width of castor bearing surface | 39 mm |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 2 863 219 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Function | Timing Chain |
Weight | 0.383 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 879 mm |
Outer diameter | 36 mm |
Rod/Strut | Push Rod |
Cone Size | 28.6 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 5.685 kg |
Internal Thread Size | M28 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023