Important compatibility info
Weight | 3.84 kg |
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Manual |
Paired article numbers | 174024 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.84 kg |
Placement on Vehicle | Right Front |
Additional Information | without electric motor |
Operating Mode | Manual |
Paired article numbers | 174023 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1035 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Height | 139 mm |
Width | 525 mm |
Paired article numbers | 194124 |
Port / Connector type | AMP 7 pin |
Number of Connectors / Ports | 7 |
Light Function | with taillight, with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with number plate light |
Weight | 1.4 kg |
Depth | 81 mm |
Type | Tail Light Assembly |
Fulfils ECE norm | R4, R6, R7, R9, R38, R23, R91 |
Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Placement on Vehicle | Right |
Weight | 0.486 kg |
Inner length 1 | 939 mm |
Outer length 1 | 1289 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 3C0 199 555 Q |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 1.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting Kit, stabiliser bar |
Placement on Vehicle | Rear Axle |
Inner diameter | 11 mm |
Additional Information | with holder |
Additional Information 2 | with bolts/screws |
Type | Mounting Kit, stabiliser bar |
Weight | 0.984 kg |
Hole Spacing | 84 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (45856)
- 2x Febi Bracket, stabiliser mounting (40445)
- 4x Febi Screw, pressure plate (29278)
Important compatibility info
External Thread Size | M14 x 1,5 |
Cable Length | 410 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
Weight | 0.065 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Caliper |
Type | Brake Caliper |
Placement on Vehicle | Front Axle Left |
Weight | 2.86 kg |
Paired article numbers | 182270 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Iron |
Placement on Vehicle | Front Axle Right |
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 54 mm |
Paired article numbers | 182269 |
Weight | 2.86 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.193 kg |
Opening Temperature | 98 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Rear |
Weight | 0.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
for OE number | 6R0 711 266 D |
Weight | 0.454 kg |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.128 kg |
Type | Tensioner, timing chain |
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Disc Thickness | 19 mm |
Placement on Vehicle | Rear Axle |
Outer diameter | 294 mm |
Thickness | 70 mm |
Minimum thickness | 17.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Weight | 6.45 kg |
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Weight | 3.066 kg |
Steering arm type | Control Arm |
Paired article numbers | 176505 |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided |
Material | PTFE (polytetrafluoroethylene) |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.22 kg |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Material | PP (Polypropylene) |
Fill quantity | 9.5 l |
Weight | 2.125 kg |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 09875 |
Thread Type | with left-hand thread |
Cone Size | 30 mm |
Function | Tie Rod End |
Weight | 3.2 kg |
Length | 168 mm |
Inner diameter | 40 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M52 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with bolts/screws |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, outer |
Length | 325 mm |
Diameter | 1 mm |
Material | Steel |
Thickness | 360 mm |
Spanner Size | 18 |
Paired article numbers | 183957 |
Rod/Strut | Coupling Rod |
Thread Length | 22 mm |
Weight | 0.805 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023