Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.891 kg |
| Width | 25 mm |
| Outer diameter | 86 mm |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.01
Important compatibility info
| Placement on Vehicle | Right |
| Length | 173 mm |
| Voltage | 24 V |
| Paired article numbers | 193012 |
| Port / Connector type | PRS |
| Number of Connectors / Ports | 2 |
| Weight | 0.228 kg |
| Mounting bores distance | 78.4 mm |
| Light Design | LED |
| Cable Length | 1250 mm |
| Manufacturer Release | ADR Zone 2 |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.01
Important compatibility info
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 80 mm |
| Bearing/Mounting Type | Soft Version |
| Function | Joint, propshaft |
| Weight | 1.018 kg |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 6 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03929)
- 3x Febi Screw (03931)
- 3x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
£55.01
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.298 kg |
| Material | PA (polyamide) |
| Type | Coolant Pipe |
| Function | Coolant Pipe |
| Additional Information | with gaskets/seals |
| Cooling Hose | from connecting pipe to thermostat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.03
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 282 W |
| Weight | 1.3 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.04
Important compatibility info
| Weight | 0.400 kg |
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.04
Important compatibility info
| Width | 96 mm |
| Outer diameter | 73 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Weight | 1.47 kg |
| Width of castor bearing surface | 34 mm |
| Track rollers material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.05
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Rear Axle Right, Upper |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 184453 |
| Additional Information | with rubber-metal mounts |
| Weight | 3.328 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.05
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Weight | 0.600 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 607 200 01 00 |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.05
Important compatibility info
| Weight | 4.92 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 105737 |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.400 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 364 mm |
| Min. Length | 242 mm |
| Pipe Diameter | 58 mm. 48 mm |
| Piston conrod diameter | 10 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.06
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 192 W |
| Weight | 1.3 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.08
Important compatibility info
| Weight | 6.65 kg |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 276 mm |
| Thickness | 69.4 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.08
Important compatibility info
| Weight | 0.855 kg |
| Material | Rubber/Metal |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 98 mm |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.08
Important compatibility info
| Weight | 7.48 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 77 mm |
| Brake Disc Thickness | 22.4 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 44 mm |
| Outer diameter | 80.9 mm |
| Inner diameter | 27.6 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Bearing Kit |
| Weight | 2.73 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
| Outer diameter 1 | 64.1 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.09
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 036 906 088 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.10
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Weight | 0.481 kg |
| Type | Brake Master Cylinder |
| Piston Diameter | 22.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.10
Important compatibility info
| Width of castor bearing surface | 27.5 mm |
| Weight | 0.86 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.11
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 79 mm |
| External Teeth, Wheel Side | 21 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 22 |
| Thread Size | M20 x 1,5 |
| Min. Length | 798 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.11
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 1.9 kg |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Height | 53 mm |
| Outer diameter | 415 mm |
| Inner diameter | 244 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.12
Important compatibility info
| Weight | 2.288 kg |
| Type | Air Filter |
| Inner diameter | 120 mm |
| Outer diameter | 249 mm |
| Height | 500 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.12
Important compatibility info
| Function | Oil sump |
| Type | Oil sump |
| Weight | 1.915 kg |
| Spanner Size | 24 |
| Additional Information 2 | with seal ring |
| Length | 400 mm |
| Additional Information | with oil drain plug |
| Extra Description | febi Plus |
| External Thread Size | M16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.13
Important compatibility info
| Outer diameter | 146 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Inner diameter | 137 mm |
| Function | Air Filter |
| Weight | 0.400 kg |
| Height | 436 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.14
Important compatibility info
| Function | Cylinder Head Cover |
| Colour | Black |
| Material | ACM (Polyacrylate), Plastic |
| for OE number | 25203036 |
| Weight | 1.34 kg |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.14
Important compatibility info
| Placement on Vehicle | engine sided |
| Weight | 0.425 kg |
| for OE number | 1 438 755 |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.14
Important compatibility info
| Weight | 5.065 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22917 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.15
Important compatibility info
| Function | Solenoid Valve |
| Type | Solenoid Valve |
| Weight | 0.4 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.17
Important compatibility info
| Weight | 3.350 kg |
| Placement on Vehicle | Rear Axle |
| Width | 68 mm |
| Outer diameter | 74 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 25 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (174501)
£55.18
Important compatibility info
| Number of circuits | 36 |
| Function | Cable Repair Set, door |
| Placement on Vehicle | Front, both sides |
| Cable Length | 200 mm |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Weight | 2.89 kg |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 139 mm. 49.4 mm |
| Thickness | 101 mm |
| Inner diameter | 33 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 113.5 mm |
| Outer diameter 2 | 71 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Weight | 1.382 kg |
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Opening Temperature | 85 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Weight | 0.260 kg |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Core Width | 160 mm |
| Core Depth | 26 mm |
| Function | Heat Exchanger, interior heating |
| Core Length | 190 mm |
| Additional Information | with gasket/seal |
| Weight | 0.53 kg |
| Type | Heat Exchanger, interior heating |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Width | 61 mm |
| Material | Aluminium |
| Diameter 1 | 75 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 40 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.621 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Weight | 0.786 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Outer diameter | 70 mm |
| Inner diameter | 60 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamp |
| Weight | 0.47 kg |
| Type | Charge Air Hose |
| Additional Information | with quick coupling |
| Hose Length | 255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 175409 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.34 kg |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with bearing, with screw, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174667)
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
£55.20
Important compatibility info
| Weight | 4.92 kg |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40625 |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31846)
- 1x Febi Fastening Bolt, control arm (40518)
- 2x Febi Fastening Bolt, control arm (32417)
£55.20
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 2.16 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with fastening/mounting material, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32321)
- 1x Febi Screw (21476)
- 1x Febi Nut (40396)
- 1x Febi Nut (14392)
£55.20
Important compatibility info
| Weight | 0.58 kg |
| Housing material | Aluminium |
| Type | Fuel filter |
| Pipe Diameter | 10 mm. 8 mm |
| Height | 257 mm |
| Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
| Additional Information 2 | with seal ring |
| Function | Fuel filter |
| Internal Thread Size | M20 x 1,5 |
| Outer diameter | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.21
Important compatibility info
| Width | 30 mm |
| Material | Plastic |
| Outer diameter | 90 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Front Axle |
| Inner diameter | 12 mm |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (12081)
- 3x Febi Nut (38061)
- 3x Febi Springwasher (38063)
- 3x Febi Washer (38062)
- 1x Febi Nut (38108)
£55.22
Important compatibility info
| Weight | 1.09 kg |
| Placement on Vehicle | Left Front |
| Paired article numbers | 19465 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Weight | 0.214 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| Weight | 0.780 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Right, Upper, Front |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Pull Rod |
| Paired article numbers | 32129 |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 1.400 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 310 825 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Placement on Vehicle | Upper |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90 |
| Timing Chain Size | G67HP, G67HR |
| Function | Timing Chain |
| Weight | 0.6 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| Outer diameter | 1 mm |
| Number of Connectors / Ports | 3 |
| Weight | 0.1 kg |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.23
Important compatibility info
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Type | Valve, crankcase ventilation |
| Weight | 0.227 kg |
| Function | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.23
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023