Important compatibility info
Function | Brake Shaft, drum brake |
Extra Description | febi Plus |
Brake Shaft Cam | S-cam |
Type | Brake Shaft, drum brake |
Screw length below head | 457 mm |
Number of Teeth | 10 |
Length | 507 mm |
Outer diameter | 110 mm |
Weight | 5.5 kg |
Internal Thread Size | M12 x 1,75 |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Number of Teeth | 10 |
Type | Brake Shaft, drum brake |
Extra Description | febi Plus |
Brake Shaft Cam | S-cam |
Screw length below head | 457 mm |
Outer diameter | 110 mm |
Length | 507 mm |
Weight | 5.5 kg |
Internal Thread Size | M12 x 1,75 |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.017 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, intake manifold pressure |
Type | Sensor, intake manifold pressure |
for OE number | 89421-26030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.117 kg |
Additional Information 2 | with bolts/screws, with washers |
Extra Description | ProKit |
Outer diameter | 140 mm |
Thickness | 32 mm |
Bolt Hole Circle Diameter | 90 mm |
Type | Joint, propshaft |
Function | Joint, propshaft |
Additional Information | with nuts |
Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101355)
- 3x Febi Screw (109455)
- 3x Febi Screw (109454)
- 6x Febi Nut (19104)
- 3x Febi Washer (19107)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Weight | 3.436 kg |
Paired article numbers | 177891 |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Expansion Tank, coolant |
Additional Information 2 | with lid |
Number of Connectors / Ports | 2 |
Weight | 0.74 kg |
Additional Information | with coolant level sensor |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Placement on Vehicle | Rear Axle |
Outer diameter | 315 mm |
Thickness | 48 mm |
Brake Disc Thickness | 23 mm |
Minimum thickness | 21.5 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 67.4 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Weight | 8.33 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint, propshaft |
Placement on Vehicle | Rear |
Outer diameter | 115 mm |
Weight | 0.4 kg |
Thickness | 24 mm |
Type | Joint, propshaft |
Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 25 mm |
Material | Metal |
Outer diameter | 62 mm |
Operating Mode | Automatic |
Weight | 0.623 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.99 kg |
Outer diameter 1 | 79 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 51 mm |
Outer diameter | 90 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 120 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Outer diameter 2 | 147 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Upper Right |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 2.15 kg |
for OE number | 1807.HF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.332 kg |
Width | 68 mm |
Length | 152 mm |
Thickness | 65 mm |
Spanner Size | 16 |
Mounting points diameter | 8.50 mm |
Function | Air Suspension Valve |
Internal Thread Size | M12 x 1,5 |
Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Length | 194 mm |
Function | Mounting, control/trailing arm |
Inner diameter 2 | 30 mm |
Inner diameter 1 | 26 mm |
Paired article numbers | 174316 |
Thickness | 69 mm |
Weight | 0.720 kg |
Width | 86 mm |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 31599 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31605 |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Weight | 3.1 kg |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Replaces | 20205; 31585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31608 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Weight | 3.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Length | 234 mm |
Placement on Vehicle | Rear Axle Right |
Weight | 3.5 kg |
Paired article numbers | 35105 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 175147 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 33 mm |
Function | Belt Tensioner, v-ribbed belt |
Type | Belt Tensioner, v-ribbed belt |
Material | Aluminium |
Operating Mode | Automatic |
Outer diameter | 70 mm |
Weight | 1.480 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Manual |
Paired article numbers | 177064 |
Weight | 3.35 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023