Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 4.176 kg |
| Placement on Vehicle | Front Axle |
| Length | 725 mm |
| Outer diameter | 36 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Thread Type | with right-hand thread |
| External Thread Size | M18 x 1,5 |
| Pipe Diameter | 36 mm |
| Cone Size | 22 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Opening Temperature | 86 °C |
| Function | Thermostat, coolant |
| Weight | 0.340 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 22820752 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Weight | 5.476 kg |
| External Teeth, Diff.Side | 22 |
| Min. Length | 810 mm |
| Wheel Sided Joint Diameter | 85.7 mm |
| Transmission-side joint diameter | 69.3 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183169 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Outer diameter | 44 mm |
| Inner diameter | 8.11 mm |
| Function | Slave Cylinder, engine brake |
| Weight | 0.315 kg |
| Length | 172.8 mm |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 24 |
| Type | Joint Kit, drive shaft |
| External Teeth, Diff.Side | 25 |
| Weight | 3.039 kg |
| Placement on Vehicle | transmission sided, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Weight | 1.643 kg |
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.15
Important compatibility info
| Minimum thickness | 25 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 51.9 mm |
| Brake Disc Thickness | 28 mm |
| Rim Hole Number | 5 -Hole |
| Weight | 7.74 kg |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| for OE number | 447 423 03 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.15
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 21950-A5000 |
| Weight | 1.240 kg |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.15
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Outer diameter | 60 mm |
| Weight | 0.556 kg |
| Width of castor bearing surface | 25 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.15
Important compatibility info
| Cone Size | 32 mm |
| Length | 387 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 36 mm |
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Weight | 4.18 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.17
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 1.356 kg |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.17
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 7.8 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 46.8 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Replaces | 108669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.18
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 188386 |
| Weight | 0.7 kg |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.18
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 24 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 627 mm |
| Transmission-side joint diameter | 68.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.18
Important compatibility info
| Weight | 2.55 kg |
| Length | 350 mm |
| Width | 350 mm |
| Outer diameter | 345 mm |
| Thickness | 140 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Rated Power | 250 W, 60 W |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.19
Important compatibility info
| Operating Mode | Electric |
| Lock System | with remote control |
| Number of Connectors / Ports | 8 |
| Driver Position | for right-hand drive vehicles |
| Function | Door Lock |
| Weight | 0.591 kg |
| Type | Door Lock |
| Additional Information | with adjuster |
| Paired article numbers | 179675 |
| Placement on Vehicle | Left Front |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.19
Important compatibility info
| Weight | 1.707 kg |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21443 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Bearing/Mounting Type | Rubber-Metal Mount |
| External Thread Size | M14 x 1,5 |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.20
Important compatibility info
| Width | 38.5 mm |
| Outer diameter | 150 mm |
| Inner diameter | 85 mm |
| Weight | 2.616 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle, inner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.21
Important compatibility info
| Weight | 0.579 kg |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Number of Chain Links | 96 |
| Type | Timing Chain Kit |
| for OE number | 06H 109 158 N S2 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45955)
- 1x Febi Tensioner, timing chain (46275)
- 1x Febi Guide, timing chain (49690)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
£64.21
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Thickness | 38 mm |
| Inner diameter | 53 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 105 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.22
Important compatibility info
| for OE number | 14 41 576 06R |
| Weight | 0.463 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186753 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.23
Important compatibility info
| Height | 277 mm |
| Outer diameter | 116 mm |
| Filter type | Filter Insert |
| Weight | 0.450 kg |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.23
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.08 kg |
| Type | Sensor, coolant level |
| Function | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.24
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Weight | 0.041 kg |
| Cable Length | 580 mm |
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.24
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 44 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 5.45 kg |
| Paired article numbers | 183214 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.26
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | with bolts/screws |
| Weight | 0.918 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.26
Important compatibility info
| Type | Brake Caliper |
| Weight | 5.45 kg |
| Brake caliper piston diameter | 44 mm |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Function | Brake Caliper |
| Paired article numbers | 183215 |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.26
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Bellow, air suspension |
| Weight | 4.45 kg |
| Thickness | 496 mm |
| Outer diameter | 259 mm |
| External Thread Size | M16 x 1,5, M12 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.27
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Left |
| Weight | 1.64 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| for OE number | 6Q0 199 555 AR |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.28
Important compatibility info
| Weight | 7.7 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 293 mm |
| Thickness | 47.1 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Number of mounting bores | 4 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.28
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.073 kg |
| Cable Length | 588 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.29
Important compatibility info
| Mounting points diameter | 14 mm. 25 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 346 mm |
| Min. Length | 252 mm |
| Weight | 3.6 kg |
| Placement on Vehicle | Front |
| Pipe Diameter | 63 mm. 38 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.29
Important compatibility info
| Weight | 0.02 kg |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Additional Information 2 | with bolts/screws |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.29
Important compatibility info
| Centering Diameter | 76 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Thickness | 51 mm |
| Brake Disc Thickness | 22 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 19 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter | 300 mm |
| Type | Brake Disc Rotor |
| Weight | 7.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.31
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 384 W |
| Weight | 1.5 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.32
Important compatibility info
| Weight | 1.88 kg |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40362 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
| Replaces | 40369 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (29242)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£64.32
Important compatibility info
| Weight | 0.414 kg |
| Height | 272 mm |
| Outer diameter | 109 mm |
| Filter type | Filter Insert |
| Seal Diameter | 121 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.33
Important compatibility info
| Weight | 0.128 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.33
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Weight | 9.370 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 338 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.34
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 177732 |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 2.39 kg |
| External Thread Size | M14 x 1,5 |
| Additional Information | with hydro mount, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102987)
- 1x Febi Nut (43739)
£64.35
Important compatibility info
| Outer diameter | 86 mm |
| Width | 37 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Weight | 4.6 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 1 | 67 mm |
| Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.35
Important compatibility info
| Weight | 0.450 kg |
| Fill Medium | Brake Fluid |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.35
Important compatibility info
| Wheel Sided Joint Diameter | 79 mm |
| Min. Length | 960 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 8.516 kg |
| Transmission-side joint diameter | 82.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22X1,5 |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.36
Important compatibility info
| Weight | 0.030 kg |
| Width | 50 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Outer diameter | 17.8 mm |
| Length | 51 mm |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.39
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with bolts/screws |
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 3 |
| Weight | 0.30 kg |
| Type | Actuator, seat adjustment |
| Function | Actuator, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.39
Important compatibility info
| Additional Information 2 | with screw |
| Width | 29 mm |
| Outer diameter | 153 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Weight | 2.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27722)
- 1x Febi Pulley Bolt (33675)
£64.41
Important compatibility info
| Weight | 7.601 kg |
| Rotor Style | Solid |
| Outer diameter | 330 mm |
| Thickness | 62.9 mm |
| Brake Disc Thickness | 14 mm |
| Minimum thickness | 11.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.41
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Width | 59 mm |
| Outer diameter | 74 mm |
| Function | Wheel Bearing Kit |
| Bolt Hole Circle Diameter | 114.3 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Weight | 3.16 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter 1 | 64 mm |
| Outer diameter 2 | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.42
Important compatibility info
| Outer diameter | 489 mm |
| Inner diameter | 458 mm |
| Number of Teeth | 161 |
| Function | Ring Gear, flywheel |
| Weight | 3.160 kg |
| Width | 22 mm |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.42
Important compatibility info
| for OE number | 5 264 546 |
| Weight | 0.855 kg |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.44
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023