Important compatibility info
Length | 146.5 mm |
Width | 84 mm |
Thickness | 44.5 mm |
Function | Oil Cooler, engine oil |
Weight | 0.538 kg |
Type | Oil Cooler, engine oil |
for OE number | 112 188 04 01 S1 |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (36368)
- 1x Febi Seal Ring, oil cooler (lubrication) (49402)
- 1x Febi Gasket, oil cooler (49403)
Important compatibility info
Weight | 3.26 kg |
Width | 99.5 mm |
Outer diameter | 156 mm. 55 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 126 mm |
Placement on Vehicle | Front Axle |
Internal Thread Size | M16 x 1,5 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.765 kg |
Placement on Vehicle | Front |
Function | Wiper Motor |
Number of Connectors / Ports | 4 |
Driver Position | for right-hand drive vehicles |
Voltage | 12 V |
Additional Information 2 | with cable |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Type | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gear, timing chain deflector |
Weight | 0.34 kg |
for OE number | 1 022 214 |
Type | Gear, timing chain deflector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 1.4 kW |
Weight | 3.25 kg |
Function | Starter |
Type | Starter |
for OE number | 62 02 094 |
Replaces | 101608 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 322 mm |
Thickness | 90 mm |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 27 mm |
Bolt Hole Circle Diameter | 154 mm |
Surface | Coated |
Function | Brake Disc |
Rim Hole Number | 6 -Hole |
Weight | 14.0 kg |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PTFE (polytetrafluoroethylene) |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Placement on Vehicle | transmission sided |
Weight | 0.14 kg |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Teeth, wheel side | 25 |
Weight | 2.090 kg |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 37 |
Function | Joint Kit, drive shaft |
Thread Size | M16 x 1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Operating Mode | Electronic |
Function | Boost Pressure Control Valve |
Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Number of Chain Links | 142 |
Chain Type | Silent Chain, Closed chain |
Weight | 0.281 kg |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.786 kg |
Type | Oil Pump |
for OE number | LF021-41-00A |
Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Weight | 0.140 kg |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Extra Description | ProKit |
Outer diameter | 24 mm |
Function | Tie Rod |
Length | 897 mm |
Steering | with tie rod ends |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Thread Length | 17 mm |
Weight | 4.5 kg |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.260 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33277)
- 1x Febi Bellow, drive shaft (14908)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 1.360 kg |
Number of Ribs | 5 |
Inner diameter | 51 mm |
Outer diameter | 145 mm |
Width | 36 mm |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Parameter | 6 PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Electric Motor, window regulator |
Type | Electric Motor, window regulator |
Weight | 0.860 kg |
Paired article numbers | 175507 |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Weight | 5.2 kg |
Placement on Vehicle | Front Axle |
Length | 600 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Adjustable | not adjustable |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 9 |
Weight | 0.056 kg |
Type | Control Unit, glow time |
Function | Control Unit, glow time |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Number of Connectors / Ports | 10 |
Combi Switch Function | with indicator function, with high beam function |
Function | Steering Column Switch |
Weight | 0.120 kg |
Type | Steering Column Switch |
Replaces | 31211 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 820 mm |
Rod/Strut | Push Rod |
Weight | 4.8 kg |
Function | Centre Rod Assembly |
Internal Thread Size | M28 x 1,5 RHT |
Cone Size | 22 mm |
Pipe Diameter | 38 mm |
Extra Description | ProKit |
Type | Centre Rod Assembly |
External Thread Size | M18 x 1,5 |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Weight | 0.2 kg |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 15905 |
Additional Information | with Thrust Bearing |
Length | 222.5 mm |
Outer diameter | 50 mm |
Function | Repair Kit, kingpin |
Placement on Vehicle | Front Axle Left, Rear Axle, Front Axle Right |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Weight | 5.103 kg |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (15890)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Spacer, kingpin (15891)
Important compatibility info
Weight | 6.731 kg |
Type | Cylinder Liner |
Function | Cylinder Liner |
for OE number | 51.01201.0468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 480 N |
Stroke | 210 mm |
Length | 555 mm |
Placement on Vehicle | Right Rear |
Weight | 0.46 kg |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 18 mm |
Housing Diameter | 18 mm |
Paired article numbers | 179753 |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 4.665 kg |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 337 mm |
Min. Length | 280 mm |
Pipe Diameter | 80 mm. 42 mm |
Mounting points diameter | 25 mm |
Piston conrod diameter | 14 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 31 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Width | 54 mm |
Weight | 3.970 kg |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Outer diameter | 92 mm |
Outer diameter 2 | 139 mm |
Outer diameter 1 | 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172777)
Important compatibility info
Function | Centre Rod Assembly |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Pipe Diameter | 52 mm |
Cone Size | 30 mm |
Driver Position | for right-hand drive vehicles |
Rod/Strut | Push Rod |
Outer diameter | 52 mm |
Length | 1059 mm |
Weight | 10.000 kg |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27946 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.32 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Inner diameter 1 | 12 mm |
Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.126 kg |
Function | Wiper Motor |
Number of Connectors / Ports | 5 |
Voltage | 12 V |
Placement on Vehicle | Front |
Type | Wiper Motor |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Electric Motor, window regulator |
Type | Electric Motor, window regulator |
Number of Connectors / Ports | 6 |
Extra Description | febi Plus |
Weight | 0.610 kg |
Placement on Vehicle | Left |
Paired article numbers | 175017 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle, Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27947 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.32 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.288 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 47733 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (44518)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Length | 1345 mm |
Number of Ribs | 6 |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Aramid |
Weight | 0.199 kg |
Alternator type | for starter generator |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (182094)
- 1x Febi Belt Tensioner, v-ribbed belt (40898)
Important compatibility info
Weight | 0.19 kg |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Type | Pressure Converter, exhaust control |
Function | Pressure Converter, exhaust control |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 11 |
Weight | 0.044 kg |
Type | Control Unit, glow time |
Function | Control Unit, glow time |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.250 kg |
Gasket outer diameter | 71 mm |
Gasket inner diameter | 64 mm |
Filter type | Spin-on Filter |
Function | Hydraulic Filter, automatic transmission |
Type | Hydraulic Filter, automatic transmission |
Outer diameter | 119 mm |
Height | 298 mm |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Electric Motor, window regulator |
Type | Electric Motor, window regulator |
Weight | 0.860 kg |
Paired article numbers | 175506 |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.599 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Cast Steel |
Inner diameter | 14 mm. 23 mm |
Steering arm type | Control Arm |
Paired article numbers | 44982 |
Cone Size | 23.2 mm. 26.8 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 70 mm |
Width | 110 mm |
Thickness | 36.5 mm |
Voltage | 28 V |
Number of Connectors / Ports | 5 |
Function | Alternator Regulator |
Type | Alternator Regulator |
Weight | 0.09 kg |
Hole Spacing | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Lower, Rear, Rear Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 1.6 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.288 kg |
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 47732 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with bolts/screws |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (44519)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Right |
Brake Caliper Type | Brake Caliper (1 piston) |
Type | Brake Caliper |
Weight | 1.68 kg |
Paired article numbers | 181962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.8 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 307 mm |
Thickness | 45.3 mm |
Brake Disc Thickness | 23.9 mm |
Minimum thickness | 22.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 79 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Weight | 0.315 kg |
for OE number | 7H0 965 561 |
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.020 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
External Thread Size | M10 x 1,5 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.98 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Rotor Style | Solid |
Placement on Vehicle | Front Axle |
Function | Brake Disc |
Surface | Coated |
Bolt Hole Circle Diameter | 130 mm |
Minimum thickness | 8 mm |
Brake Disc Thickness | 9.5 mm |
Outer diameter | 278 mm |
Thickness | 83.8 mm |
Centering Diameter | 39.8 mm |
Weight | 6.4 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Exhaust Side |
Paired article numbers | 177769 |
Extra Description | febi Plus |
Weight | 0.297 kg |
Additional Information | with gasket/seal |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.646 kg |
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 38484 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (21559)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023