Proud to be a UK-based company
Contact us
Important compatibility info
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.864 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Paired article numbers | 174743 |
| Additional Information | with rubber mounts, with crown nut and split pin |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.19
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Cable Length | 680 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.077 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Exhaust Manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.19
Important compatibility info
| Weight | 0.702 kg |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
| Number of Connectors / Ports | 4 |
| Function | Relay Valve |
| Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.20
Important compatibility info
| Weight | 0.420 kg |
| Number of Connectors / Ports | 2. 4 |
| Opening Temperature | 100 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.20
Important compatibility info
| Wheel Sided Joint Diameter | 88.9 mm |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 82.3 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 922 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 9.140 kg |
| External Teeth, Wheel Side | 36 |
| Paired article numbers | 180786 |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.22
Important compatibility info
| Housing Type | without housing |
| Additional Information | with gasket/seal |
| Weight | 0.07 kg |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.25
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.054 kg |
| Cable Length | 280 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.26
Important compatibility info
| Weight | 9.78 kg |
| Thickness | 120 mm |
| Function | Bush, parabolic spring |
| Width | 165 mm. 135 mm |
| Length | 230 mm. 210 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.28
Important compatibility info
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Material | Aluminium |
| Core Length | 584 mm |
| Function | Condenser, air conditioning |
| Type | Condenser, air conditioning |
| Refrigerant | R 134a |
| Weight | 1.783 kg |
| Core Width | 311 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.29
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | transmission sided |
| Weight | 1.755 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.30
Important compatibility info
| Weight | 1.35 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.31
Important compatibility info
| Weight | 6.4 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.31
Important compatibility info
| Weight | 0.05 kg |
| Operating Mode | Hydraulic |
| Function | Actuator, seat adjustment |
| Type | Actuator, seat adjustment |
| Inner diameter 2 | 8 mm |
| Inner diameter 1 | 4.6 mm |
| Inner diameter 3 | 8.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.32
Important compatibility info
| Weight | 11.4 kg |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 249.3 mm |
| Width | 111.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29 mm |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.35
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 6.1 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 308 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 14 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.39
Important compatibility info
| Weight | 4.4 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 32 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Outer diameter | 89 mm |
| Width | 55 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.41
Important compatibility info
| Weight | 0.557 kg |
| Inner diameter 2 | 35 mm |
| Inner diameter | 7 mm |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Cooling Hose | from distributor to engine cooler |
| Outer diameter | 14 mm |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.41
Important compatibility info
| Weight | 6.08 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 35.9 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.41
Important compatibility info
| Weight | 1.75 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 82 mm |
| Outer diameter | 120 mm |
| Inner diameter | 24 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.45
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.95 kg |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023